-
Posted by sangeeta268 on Oct 9th, 2009 at 12:46pm
test
zzz
-
Posted by pabrbc3b on Jul 21st, 2009 at 3:11pm
3M MP8640 PROJECTOR
how can i clean dust on the inside surface of the lense?
-
Posted by johniricarte on Jun 3rd, 2009 at 7:04am
3M MP7650
lamp status red, lamp life 1000hrs, replace lamp with new, but lamp status still red.
-
Posted by folkloricofiesta on May 27th, 2009 at 11:36pm
need manual
purchased with no manual
-
Posted by rparra on May 5th, 2009 at 4:03pm
Installation Instructions
-Any weather concerns for application ie. heat surface below 60 degrees
-Pressure needed to apply ie. is stepping on it OK or do we have to run over it with truck?
Any other info needed to apply markers?
Thanks
-
Posted by sabine.debeer on Mar 16th, 2009 at 7:17am
air filter cleaning
We have a 3M digital projector S15i. It ask us a filter cleaning. We have lost the operating guide so how do I proceed?
thank you for informations
-
Posted by wilsond212 on Feb 25th, 2009 at 1:07pm
light won't come on
not sure if it's the light or a switch; can anyone help with a schematic?
-
Posted by ancientinktattoo on Feb 18th, 2009 at 6:46pm
thermo fax wont stop running
my thermofax wont stop running
-
Posted by l.fogarty on Jan 24th, 2009 at 12:56pm
how to reload refills
how do i reload the refills?
-
Posted by ameliadesigns on Jan 20th, 2009 at 6:49pm
sticking
adhesive not sticking --- need more presure or heat what???
-
Posted by path1950 on Jan 15th, 2009 at 11:33am
temp outside doesn't register
new batteries didn't help
-
Posted by gsheridan393 on Jan 15th, 2009 at 5:16am
manual
user manual english
-
Posted by ja2587 on Jan 11th, 2009 at 3:42pm
surround home theater
we need a remote code for the universal remote " one for all " URC-6131B00
-
Posted by lsisson on Dec 10th, 2008 at 1:34pm
Overhead projector
I have a overhead projector where the top is suppose to slide open to change the bulb. Unfortunately, it only opens an inch. In this case we are unable to change the bulb..All of the manuals have been misplaced..
-
Posted by dcamp1 on Dec 7th, 2008 at 10:22pm
Need Manuel
Have figured out how to make bow BUT not how to use the round wheel on top to make carnation flower/bow
-
Posted by bradley.davis on Dec 7th, 2008 at 3:50am
Faulty Display
Hope someone can help I have a 3M MP7750 and I have switched it on and get a striped display, the menu is unreadable it is just made up of squares. It has a green power light but no warning lights the bulb and fan start up as normal just get stripes running from the top to the bottom of the screen a…
-
Posted by ontheroof on Nov 10th, 2008 at 2:22pm
need instructions
this is a craft or package bow maker. (not violin). It holds different size ribbons and cranks to make the ribbon
-
Posted by teresa on Nov 10th, 2008 at 9:12am
Using USB Input
We cannot access Powerpoint presentation on USB Flashdrive. What do we need to do?
-
Posted by info on Nov 5th, 2008 at 7:20am
manual required
requred
-
Posted by rnscotty on Sep 28th, 2008 at 1:32am
2 red lights no buld illumination
MP7750
Replaced the bulb (new)
Powerup projector
Standby light is on
Power light is on and red
Lamp light is flashing red
I have removed the new lamp and reseated it correctly still nothing.
Lamp does not light
Any help would be greatly appreciated.
-
Posted by udo.wendel on Sep 19th, 2008 at 3:49pm
circuit diagram
I try to repair my 3M MP7750 projector. on the lmap power supply board there are two resistors which look a litle carbonized so that teh values are not readable any more R06 is 6?8 or 8?9 And the value of R07 I can't read anything. Measurement with multimeter in the mounted state shows 130kOhm.
I su…
-
Posted by mksteele on Sep 18th, 2008 at 8:31pm
no lamp
replaced the lamp and lamp light remains on
-
Posted by jhoward on Jul 28th, 2008 at 9:54am
Need a part
One of the Lens(I guess it is a lens. It is square and plastic) inside the projector looks like it got to hot and has turned brown. It makes the picture have a brown tint.Can I just buy a new lens?
-
Posted by jimowatt on Apr 27th, 2008 at 7:22pm
replacing filters
How to remove old filters and replace with new ones
-
Posted by jacasey3 on Apr 4th, 2008 at 2:17pm
3M Vinyl Shield (RV Mask/Bra)
How do I apply/install the 3M Vinyl Shield material to the surface of my motor coach (RV)?
Do I need any special tools or solutions?
Any help is greatly appreciated.
Thank you - Jim