Help Requests

American Standard Furnace Gas Furnaces

Get This Manual


Can You Help With These Problems?

  • Posted by jeffray971 on Mar 12th, 2014 at 3:11am

    blower blows continuously without heating
    blower blows continuously without heating
  • Posted by jmsimmonds on Mar 4th, 2014 at 1:15pm

    Where does the filter goes
    Where does the filter goes
  • Posted by lktbtt on Feb 22nd, 2014 at 4:00pm

    freedom 78 is it high efficiency
    freedom 78 is it high efficiency
  • Posted by jimmycozzo on Feb 4th, 2014 at 3:07pm

    American Standard freedom 90 single stage furnace
    American Standard freedom 90 single stage furnace I'm trying to locate the igniter
  • Posted by sheilaindy3 on Jan 9th, 2014 at 9:50pm

    I have an American standard Freedom 80 furnace, ma
    I have an American standard Freedom 80 furnace, manufacture date of 2-97...I cant seem to get the darn thing open so I can change the filter. Its running and everything, but I really need to change it soon....I forgot to do it in the fall :(
  • Posted by crooksy on Dec 18th, 2013 at 1:17pm

    hi, I have an American standard freedom 80 furnace
    hi, I have an American standard freedom 80 furnace that I am missing a manual for. the serial number is d342940p01. Is there any way I could be sent one? thanks so much for your time:) -William



    It wasn't igniting for some reason, so I blew out the dust and lint and it seems to be working fine at …
  • Posted by kenthaagjr.kh on Dec 7th, 2013 at 6:20pm

    Location of igniter on American standard freedom 9
    Location of igniter on American standard freedom 90
  • Posted by herbiemanning on Nov 14th, 2013 at 1:32am

    Unit works on initial start up. Once set temp is r
    Unit works on initial start up. Once set temp is reached burners cut off but both fans keep going and lock out occures. Flashes 5 times. "Flame sensed with gas cut off". Cut power off then on it will work again for one cycle. Is there volt, or impedance values to check before getting new board
  • Posted by on Sep 22nd, 2013 at 9:11am

    Furnace will not ignite. All we get is a buzzing s
    Furnace will not ignite. All we get is a buzzing sound . The blower works so the problem is in the electronic ignition area???
  • Posted by sarahduncan518 on Jun 12th, 2013 at 3:57pm

    where is the switch for a/c to come on
    There is a switch the repairman flipped last yr to make it come on. Where is it located?
  • Posted by stephanie_byrd on Mar 25th, 2013 at 12:52pm

    Got kids please help
    Got kids please help
  • Posted by stephanie_byrd on Mar 25th, 2013 at 12:50pm

    Help
    American standard 90 and starts up and all pilot lights light and right before it goes it kicks main breaker
  • Posted by anill13 on Mar 18th, 2013 at 12:27am

    Light blinks 4 times furnace is a freedom 90 singl
    Light blinks 4 times furnace is a freedom 90 single stage
  • Posted by ahendricks43 on Dec 26th, 2012 at 4:51pm

    Three flashes, no heat
    My single stage80 flashes three times but will not kick on.please help
  • Posted by advpowerwashing on Dec 19th, 2012 at 5:12pm

    MY PILOT WILL NO IGNITE
    MY PILOT WILL NO IGNITE
  • Posted by kingdavidg1 on Nov 5th, 2012 at 12:46am

    I have a American standard freedom 80 (model# 080c
    I have a American standard freedom 80 (model# 080c936H3). The blower cuts on by itself and won't shut off and just blows cold air. When I can get it act right it reaches the set temp. Cuts off & 15 min later cuts on by itself just blowing cold air? Can u Please help.. Thx
  • Posted by falcon_8158 on Nov 3rd, 2012 at 1:09pm

    how to fix a pressure switch problem? I've already
    how to fix a pressure switch problem? I've already replaced the pressure switch itself.
  • Posted by russell.l.boynton on Nov 1st, 2012 at 6:20pm

    Light blinks 4 times furnace is a freedom 90 singl
    Light blinks 4 times furnace is a freedom 90 single stage
  • Posted by bashiryeadon on Oct 13th, 2012 at 5:19pm

    the pilot went out where do you light the pilot ?
    the pilot went out where do you light the pilot ? Switch has been turned off for more than 5 minutes,there is no gas on the chamber,I do not see where to put the flame for the pilot
  • Posted by d_scott77 on Oct 8th, 2012 at 9:37am

    Furnace is working - blinking red light on furnace
    Furnace is working - blinking red light on furnace. One time it was continual - another time it was 4 blinks and stop and 4 blinks and stop
  • Posted by stevekolar on Mar 26th, 2012 at 8:19pm

    What does it mean when the light is flashing and w
    What does it mean when the light is flashing and what should I do?
  • Posted by cool on Mar 13th, 2012 at 7:56pm

    The red indicator light on the front of the furnac
    The red indicator light on the front of the furnace is flashing. Is this normal?
  • Posted by tom on Feb 13th, 2012 at 1:41pm

    In regards to the American Std. furnace, Mod. # CU
    In regards to the American Std. furnace, Mod. # CUB120A96080, s/n P412N7T1G - Could you please tell me the BTU output?
  • Posted by tom on Feb 13th, 2012 at 1:05pm

    American Std. Model # CUB120A96080 S/N P412N7T1G
    American Std. Model # CUB120A96080

    S/N P412N7T1G

    I need a owners manual for this and what is the BTU output for this unit. Please advise. Thank you.



    Tom
  • Posted by chc1954 on Feb 12th, 2012 at 9:10am

    TUC100B948A0 model # need manual red light const
    TUC100B948A0 model # need manual red light constantly flashing no heat power venter running
  • Posted by tmikulecky on Feb 9th, 2012 at 4:36pm

    I just moved ito a house with an american stander
    I just moved ito a house with an american stander freedom 90 single stage furnace. It has a red light flashin on the side - is this a problem?
  • Posted by noncents4 on Dec 12th, 2011 at 1:51pm

    I have an American Standard furnace Model # UGF 1
    I have an American Standard furnace Model # UGF 105E1 Serial # H 64B0147557. After the burners shut down, The blower moter runs for 2 to 3 minutes and the air is cold. Could it be that the blower & limit control needs to be replaced? If so, do you have the part and how much is i…
  • Posted by nastique on Dec 1st, 2011 at 2:35pm

    Furnace cycyes fails start diferent seqence at dif
    Furnace cycyes fails start diferent seqence at diferent times somtimes works corectly. note: fan comes on,igniter glows red, gas valve opens buners start, blower does not start burners shut off cycle starts over. and sometimes somtimes fan on, igniter glows red, burners dont start cycles over again.…
  • Posted by nastique on Dec 1st, 2011 at 1:55pm

    Need manual for model ADD060C936C3 Furnace
    Need manual for model ADD060C936C3 Furnace
  • Posted by lmy1953 on Nov 19th, 2011 at 9:27am

    looking for manual for ACONT800AS11AAA runs my A/C
    looking for manual for ACONT800AS11AAA runs my A/C and gas heater
  • Posted by kc5pbf on Nov 9th, 2011 at 11:27am

    what are the dimensions of the american standard 8
    what are the dimensions of the american standard 80 gas furnace
  • Posted by midnightview2000 on Oct 10th, 2011 at 6:15pm

    furnace fan stays on but no heat
    furnace fan stays on but no heat
  • Posted by rdnckchik001 on Sep 12th, 2011 at 3:19pm

    American Standard Freedom 80 has power to it but t
    American Standard Freedom 80 has power to it but the red light will not come on and the heat or air will not kick on.
  • Posted by ditullios on Feb 9th, 2011 at 10:13pm

    no heat 4 red flashes
    4 red flashes mean thermal protection device open. Can I overide it to get through the -15 degree night ahead until i can get service in the morning?
  • Posted by dmfritz on Feb 4th, 2011 at 5:48am

    I added a in line duct fan
    how do I wire this up to my control board when the indoor fan comes on
  • Posted by kysheeler on Oct 3rd, 2010 at 12:43am

    american standard freedom 80
    have a two stage installed but only recieving single stage questioning the wiring. would like a wiring diagram if possible.
  • Posted by leafar47 on Mar 10th, 2010 at 3:19pm

    guf 105d e3
    burner fires but blower motor wont power on

    and pls. provide manual/schematic
  • Posted by on Feb 5th, 2010 at 8:09am

    The burners fire...
    ...for 2 minutes at a time after every 10 minutes. Is this normal.
  • Posted by on Feb 4th, 2010 at 10:25pm

    How to purge...
    ...the furnace, series 575.
  • Posted by on Feb 1st, 2010 at 7:59am

    four blinking lights...
    ...on my furnace-- what does it mean?
  • Posted by on Jan 30th, 2010 at 12:16pm

    how to regulate...
    ...the temperature
  • Posted by on Jan 29th, 2010 at 8:27pm

    finding what blinking...
    ...lights mean on panel when furnace turns off
  • Posted by on Jan 28th, 2010 at 10:34am

    where is the...
    ...limit switch located on the furnace?
  • Posted by on Jan 27th, 2010 at 11:57pm

    COLEMAN EVCON MODEL...
    ...BGU05012AX
  • Posted by on Jan 26th, 2010 at 10:33pm

    AMERICAN STANDARD CDB100A945C1...
    ...
  • Posted by on Jan 26th, 2010 at 7:07pm

    exhaust pipe install...
    ...
  • Posted by on Jan 26th, 2010 at 6:44pm

    changing the filter...
    ...
  • Posted by on Jan 26th, 2010 at 6:25pm

    Air bear furnace...
    ...filter
  • Posted by on Jan 24th, 2010 at 3:08pm

    blower fan won't...
    ...turn off
  • Posted by on Jan 23rd, 2010 at 5:51pm

    what does a...
    ...solid red light (not blinking, just lit) on the furnace board mean?
  • Posted by on Jan 23rd, 2010 at 5:37pm

    pilot light goes...
    ...out
  • Posted by njstds on Dec 17th, 2009 at 12:41pm

    Dehumifier
    Should humifier be conected to come on with blower or with the heat? thanks for your answer Tom
  • Posted by nick_bruno_tiles on Dec 9th, 2009 at 4:45am

    Iintell-Ignition board white rodgers
    i replace my board, on amercain standard & missedplaced where the wires go.
  • Posted by etconsultants on Nov 19th, 2009 at 9:44am

    Solid Red with Solid Green LED
    The furnace control board status lights are Solid Red with Solid Green LED. What needs to be done?
  • Posted by etconsultants on Nov 19th, 2009 at 9:20am

    control board
    I was working on adding a duct run from the furnace (95 Comfort R). I made contact with the metal duct and the thermostat wire and the furnace stopped running. I thought I broke the thermostat wire, so I replaced it. I don't have power from the furnace to the thermostat (Honeywell TH6220D), so I…
  • Posted by hufnagl on Nov 6th, 2009 at 11:53pm

    Freedom 80 furnace
    Can the furnace be run on any of the four fan speeds during the heat cycle?
  • Posted by rcat599 on Oct 15th, 2009 at 9:07pm

    furnance repair
    The blower comes on, but the flames never start. Furnance is 8 years old any ideas?
  • Posted by cccma on Oct 13th, 2009 at 1:27pm

    Filter cleaning
    I had a Freedom 95 Comfort-R furnace installed last year. I want to clean the filter. I was told you can clean it by hosing it with water. My question is what side do I spray the water through. I'm guessing that it is the opposite side of where the dust and dirt is on ( the side into the duct work )…
  • Posted by francis.murnane on Oct 1st, 2009 at 6:08pm

    lighting
    pilot won't light
  • Posted by johnsonfred67 on Jan 7th, 2009 at 5:29pm

    Manual
    Ineed the manual for this brand of furnace and also tha wiring diagram
  • Posted by niki5617 on Dec 29th, 2008 at 11:18pm

    high limit device
    4 flashes means OPEN HIGH LIMIT DEVICE. What and where is said item. also, manual would not upload or download or whatever. THANK YOU
  • Posted by atarod on Dec 8th, 2008 at 1:14am

    presure switch
    presure switch
  • Posted by sir_sid on Oct 26th, 2008 at 11:27am

    cub040a924c0
    Need wiring diagram.
  • Posted by sperlander on Oct 21st, 2008 at 11:38pm

    manual for a standard cub040a924c0
    wiring thanks

Ask OwnerIQ Members for Help With A Problem

Let the ManualsOnline Membership help you! Tell us about the problem you're having with this product. Your request will be posted for the ManualsOnline membership to view. You will be notified of responses by email. Required fields are in BOLD.

Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
  



TRUSTe Seal


  • Facebook
  • Twitter
  • ManualsOnline Blog
  • ManualsOnline Google Plus