Help Requests

Husqvarna Chainsaw 445

Get This Manual


Can You Help With These Problems?

  • Posted by rogerlloydwms on Jun 25th, 2012 at 9:20pm

    I have a Husqvarna 445 w/18 inch chain. What size
    I have a Husqvarna 445 w/18 inch chain. What size file is required for sharpening?



    Thanks.



    Roger L. Williams
  • Posted by tracycole5 on Aug 20th, 2011 at 9:55am

    need to remove clutch cover so I can replace front
    need to remove clutch cover so I can replace front hand guard
  • Posted by dbenshoof on Jun 4th, 2011 at 8:36pm

    need to know exactly where to find the oiler adjus
    need to know exactly where to find the oiler adjustment screw
  • Posted by astchief312 on Apr 12th, 2011 at 10:46am

    putting chain break cover back on
    can't get the chain break cover to go back on after changing chain
  • Posted by uncletom_57 on Mar 29th, 2011 at 11:33pm

    chain oiler
    doesn't oil chain and bar properly. There is an adjustment for it on bottom but don't know where it is.
  • Posted by buffalo_stewart on Dec 13th, 2010 at 11:13pm

    445 huskavarna chain saw
    the drum sprocket seems to wear out fast,the main problem is the bar and chain don,t seem to get enough oil,bar smokes bad and burns on bottom of bar.
  • Posted by sam_tripathi2002 on Jun 21st, 2010 at 4:01pm

    What kind of gas do I use?
    I want to make sure I get the right gas for this chainsaw, can anyone help?
  • Posted by bob_seng on May 27th, 2010 at 11:14pm

    sprocket replacement
    Teeth on the original sprocket were damaged by the chain
  • Posted by bob_seng on May 27th, 2010 at 11:13pm

    sprocket replacement
    Teeth on the original sprocket were damaged by the chain
  • Posted by wrest on Dec 26th, 2008 at 8:19pm

    Cant get cahina nd bar cover with brake back on
    Just purchased. Took chain cover off with great difficulty to put bar and chain on and cannot, after hours of trying everything, get the chain break cover back on.



    I have followed directions meticulously and conclude something must be wrong.



    anyone know what might be wrong
  • Posted by dwarren on Oct 28th, 2008 at 10:30am

    Clutch drum.
    I bought a new chain sprocket/clutch drum for my 445 but It came with no instructions. How doo I remove the old one so that I can install the new one? Thanks Dave W
  • Posted by perry on Aug 10th, 2008 at 8:13am

    Husqvarna 445 Won't Start - Brand New
    This is our second 445. The first ran fine, but it had a faulty chain break. The replacement will not start using the same fuel mix the other one ran on fine. It pulls, but does not start. Any help will be appreciated.

Ask OwnerIQ Members for Help With A Problem

Let the ManualsOnline Membership help you! Tell us about the problem you're having with this product. Your request will be posted for the ManualsOnline membership to view. You will be notified of responses by email. Required fields are in BOLD.

Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
  



TRUSTe Seal


  • Facebook
  • Twitter
  • ManualsOnline Blog
  • ManualsOnline Google Plus