Casio 1995 Watch User Manual


  Open as PDF
of 2
 
1995-1
Module No.1995
ABOUT THIS USER’S GUIDE
Congratulations upon your selection of this CASIO watch. To get the most out of your purchase, be sure to carefully read this User’s Guide and keep it on hand for later reference when
necessary.
• Button operations are indicated using the letters shown in the illustration.
• This watch displays white figures on a black background, but all sample displays in this User’s Guide show black figures on a white background.
Countdown Alarm Mode Stopwatch Mode Alarm Mode
GENERAL GUIDE
• Press
CC
CC
C to change from mode to mode.
• The animation area shows different animated characters and graphics, depending on the mode and the operation being performed. Animated graphics also appear at the top of each
minute in the Timekeeping Mode.
• The watch automatically returns to the Timekeeping Mode if you do not perform any button operation for two or three minutes in any other mode.
Animation area
Timekeeping Mode
TIMEKEEPING MODE
• In the Timekeeping Mode, press
BB
BB
B to switch between the month and the day of the
week screens. With the month screen, the animation area shows repeating charac-
ters that indicate the current day of the week. With the day of the week screen, it
shows a G-mark.
• In the Timekeeping Mode, press
DD
DD
D to switch between the 12-hour and 24-hour
formats.
• In the Timekeeping Mode, press
EE
EE
E to illuminate the display for about two seconds.
To set the time and date
1.Hold down
AA
AA
A while in the Timekeeping Mode until the seconds digits start to flash
on the display. The seconds flash because they are
selected
.
2.Press
CC
CC
C to change the selection in the following sequence.
Seconds
Day
Hour
Minutes
YearMonth
3.While the seconds digits are selected (flashing), press
DD
DD
D to reset the seconds to
00. If you press
DD
DD
D while the seconds count is in the range of 30 to 59, the seconds
are reset to 00 and 1 is added to the minutes. If the seconds count is in the range
of 00 to 29, the minutes count is unchanged.
4.While any other digits (besides seconds) are selected (flashing), press
DD
DD
D to in-
crease the number. Holding down
DD
DD
D changes the current selection at high speed.
5.After you set the time and date, press
AA
AA
A to return to the Timekeeping Mode.
• The day of the week is automatically set in accordance with the date.
• The date can be set within the range of January 1, 1995 to December 31, 2039.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
About the backlight
Depending on the mode, pressing
EE
EE
E or
BB
BB
B turns on the backlight for about two sec-
onds. See the sections that cover each mode for information on whether you should
press
EE
EE
E or
BB
BB
B.
• The backlight of the watch employs an electro-luminescent (EL) light, which loses
illuminating power after very long use.
• The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
• The watch will emit an audible sound whenever the display is illuminated. It does
not indicate malfunction of the watch.
• The backlight automatically stops illuminating whenever an alarm sounds.
COUNTDOWN ALARM MODE
The countdown timer can be set within a range of 1 sec-
ond to 60 minutes. When the countdown reaches zero,
an alarm sounds.
• In the Countdown Alarm Mode, press
BB
BB
B to illuminate
the display for about two seconds. To illuminate the dis-
play while setting the countdown time (while the min-
utes or seconds digits are flashing), press
EE
EE
E.
To set the countdown time
1.Hold down
AA
AA
A while in the Countdown Alarm Mode until
the minutes digits start to flash on the display. The min-
utes digits flash because they are
selected
.
2.Press
CC
CC
C to change the selection in the following se-
quence.
Minutes
Seconds
Press
BB
BB
B
Hour : Minutes Seconds
Animation area
Day
Day of the week
PM indicator
Month Screen
Day of the Week Screen
Month – Day
Animation area
( )
T
➔
U
➔
E
3.Press
DD
DD
D to increase the selected number. Holding down
DD
DD
D changes the selection
at high speed.
• To set the starting value of the countdown time to 60 minutes, set 00'00".
4.After you set the countdown time, press
AA
AA
A to return to the Countdown Alarm Mode.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Countdown Alarm Mode automati-
cally.
To use the countdown timer
Press
EE
EE
E while in the Countdown Alarm Mode to start the countdown timer.
• When the countdown reaches zero, an alarm sounds for 10 seconds or until you
stop the alarm by pressing any button. The countdown time is automatically reset
to its starting value after the alarm stops.
• Press
EE
EE
E while a countdown operation is in progress to pause it. Press
EE
EE
E again to
resume the countdown.
• To completely stop a countdown operation, first pause it (by pressing
EE
EE
E), and then
press
DD
DD
D. This returns the countdown time to its starting value.
About countdown indicators
An audible beep and the EL backlight keep you informed about the progress of the
countdown as noted in the following table.
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. You also get Auto-Start function.
The range of the stopwatch is 59 minutes, 59.99 seconds.
• In the Stopwatch Mode, press
BB
BB
B to illuminate the dis-
play for about two seconds.
To measure elapsed time
1.Press
EE
EE
E to start the stopwatch.
2.Press
EE
EE
E to stop the stopwatch.
• You can resume the measurement operation by press-
ing
EE
EE
E again.
3.Press
DD
DD
D to clear the stopwatch to all zeros.
To record split times
1.Press
EE
EE
E to start the stopwatch.
2.Press
DD
DD
D to display the timing up to that point. Stopwatch timing continues internal-
ly.
3.Press
DD
DD
D to clear the split time and to continue time measurement on the display.
• You can repeat steps 2 and 3 as many times as you want.
4.Press
EE
EE
E to stop the time measurement.
5.Press
DD
DD
D to clear the stopwatch to all zeros.
To time first and second place finishes
1.Press
EE
EE
E to start the stopwatch.
2.Press
DD
DD
D when the first finisher crosses the line, and record the time.
3.Press
EE
EE
E when the second finisher crosses the line.
4.Press
DD
DD
D to display the finishing time of the second finisher.
5.Press
DD
DD
D again to clear the stopwatch to all zeros.
Current time
1/10 second
Minutes
Seconds
Animation area
( )
T
➔
M
➔
R
Indication Start 5'00"0 Time Up
Beep 1 second 1 second 10 seconds
Backlight 1 second 1 second 2 seconds
1/100 second
Minutes
Current time
Seconds
Animation area
( )
S
➔
T
➔
W