CompuSTAR 1WSHR Automobile Alarm User Manual


 
1
1WSHR – PRO USER’S GUIDE
___________________________________________________________________________________________________________________
THANK YOU
Thank you for purchasing a CompuStar alarm and/or remote start system. CompuStar alarms and remote-start systems are the most advanced
systems on the market with amazing features, incomparable ease of use, and breakthrough technologies never before utilized in the automotive
environment. Please take time to read and understand this owner’s manual so that you can enjoy your new CompuStar system.
___________________________________________________________________________________________________________________
BUTTON FUNCTIONS
If you purchase a Starter or Alarm only system then you will not have all the functions listed below. An Alarm/Starter Combo system will have
all of the functions listed below depending on vehicle.
Button 0.5 sec 2.5 sec 3.5 sec
Locks and Arm Lock then Panic (*8)
Unlocks and Disarm
Aux 1 Trunk Release (*7)
Aux 2 Remote Start On/Off
Siren On/Off
Option Programming Menu #1 – Installer
Only
Valet Mode On/Off (*2) Shock Sensor On/Off
Drive Lock On/Off (*3)
Option Programming Menu #2 – Installer
Only
Passive Arming On/Off
Timer Start On/Off (*4)
Turbo Mode On/Off (*5) Query to activate Secure Aux (*1)
Some of the button functions above require additional programming by the installer. Here is a list of options that you may want to review
before installation. These are features that may not be normally set up at the time of installation. Therefore, there may be an extra charge for
these features and installation. Please consult your installer if you would like any of these features. Some of these features require extra
installation. You can match the function from the above menu with the option of the below menu by finding the corresponding starred numbers.
Example: Valet Mode Function (*2) matches Option 3-10 (*2).