Dynex DX-WBRDVD1-CA Blu-ray Player User Manual


 
Connecting a TV
Using HDMI (best)
Using an AV cable
Note: The AV cable can only send standard-denition video (480i) to your TV.
To connect to a home theater, see your User Guide.
Connecting to your home network
This player can be connected to your wired network using the Ethernet port on the
back of your player or using a wireless network. Using a wired network provides the
best performance, because the attached devices connect directly to the network and
are not subject to radio frequency interference.
There are three types of wireless network connections:
User selects a network form a list of available networks
User uses WIFI protected Setup
Connecting to the Internet with a wireless network:
1 Set up your access point or wireless router (if not already set up).
2 Press ENTER. The Settings menu opens.
3 Press or to select Network, then press ENTER.
4 The Wireless Settings screen opens.
5 Press ENTER. The Network List screen opens showing a list of available wireless
networks.
6 Press or to select the wireless network you want your player to connect to,
then press ENTER. A Network Setup screen opens with the following options:
Connect—Connect to this network.
Disconnect—Disconnect from this network.
Delete—Delete the current network.
WPS Pin—Create a random PIN number password.
7 If your network does not use encryption, press or to select Connect, then
press ENTER. If the wireless network is working, you should see a checkmark and
a connected message on the TV. If the message does not appear, repeat the
steps above.
OR
If your network uses encryption:
a Press or to select the Password eld, then press ENTER.
An on-screen keyboard opens.
b Press , , , or to select the rst letter in the password, then press
ENTER. Repeat this step to enter the rest of the password. If you make a
mistake, use the clear key to delete the character.
c After you enter the password, select the red “Done” in the upper left-hand
corner of the keyboard, then press ENTER to close the keyboard.
d Press
or to select Connect, then press ENTER. A connection message
appears. Select Close, then press ENTER. If the connection is not successful,
repeat the steps above.
Connecting to the Internet with a wired network:
1 Connect a network cable to the INTERNET jack on the back of your player and
into a wired router using a commercially available LAN or Ethernet cable
2 Press ENTER. The Settings menu opens.
Congratulations on your purchase of a
high-quality Dynex product. Your
DX-WBRDVD1/DX-WBRDVD1-CA represents
the state of the art in Blu-ray Disc player
design and is designed for reliable and
trouble-free performance.
Package contents
Blu-ray disc player AAA batteries (2)
• Remote control User Guide
Quick Setup Guide
Installing remote control batteries
1 Remove the battery compartment cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
For the most updated User Guide, please visit
www.dynexproducts.com
Quick Setup Guide I DX-WBRDVD1/DX-WBRDVD1-CA for Connected Blu-ray Disc Player
TV Back of player
Back of player
A/V cable
TV
Settings
Language
Parental
System
Network
Display
Audio
BD-Live
Network List
WiFi Protected Setup(WPS)
Manual
IP Settings
Wireless
Network List
Hartleys
Steven
Linsys
Wired router
Back of player
Network cable
Yellow=Video
White=Left audio
Red=Right audio
Settings
Audio
Network
Display
Display
HDMI Status
HDMI preferred Format
Resolution
TV Aspect
Film Mode(1080p24)
Deep Color
Connected
1080P
HDMI Auto
16:9 Original
Off
Auto
System
Language
BD-Live
Parental