GE PSB42LSR Refrigerator User Manual


 
PSB42LSR – GE Profile
42" Built-In Stainless Side-By-Side Refrigerator
with Electronic Dispenser
Specification Revised 1/06
210319
Dimensions (in inches)
For answers to your Monogram,
®
GE Profile
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers’
standards.
42" Frame-to-Frame
Depth Including
Handles 26-7/8"
41"
Case Width
25-3/8" Case Depth
*81-3/4"
at Rear
*84" From
Floor to
Top Frame
* Shipping height
* The front height may be
adjusted from 83-1/2" to
84-1/2" by adjusting
front and rear leveling
legs a maximum of 1".
Product Clearances
These refrigerators are equipped with a 2 position door stop.
The factory set 130° door swing can be adjusted to 90° if
clearance to adjacent cabinets or walls is restricted.
130° Door Swing 90° Door Swing
B
A
23-7/8"
Behind
Frame
C
D
D
Models A B C D
42" 12-3/16" 16" 24" 4"
Allow minimum clearances for Freezer door (Dimension A) and
Fresh Food door (Dimension B) for a full 130° door swing and
to allow for drawer removal.
Four inch (4") minimum clearance is required when door swing
is adjusted to 90°. If the 90° door stop position is used,
drawer access is maintained, but drawer removal is restricted.
Listed by
Underwriters
Laboratories
Stainless Steel Wrapped Refrigerators
Stainless Steel wrapped refrigerators have wrapped doors
and grille panels, and beveled edges. These models are
shipped ready for installation.