Hy-Tek Manufacturing BW-1220US Universal Remote User Manual


 
1
Congratulations!
Your BIG BUTTON™ Universal Remote
Control is a state-of-the-art device that
integrates many different infrared remote
controls. (NOTE: The BIG BUTTON™ is
not compatible with UHF (RF) controlled
devices.)
The BIG BUTTON™ is pre-programmed
at the factory, but you will need to enter a
Device Code for each device to complete
the program. Simply enter correct device
codes for your equipment and your BIG
BUTTON™ is ready to use! A Device
Code List is included in this User’s
Manual.
The BIG BUTTON™ replaces up to 5
separate remote controls to operate your
infrared controlled television (TV), video-
cassette recorder (VCR), cable box (CBL)
or satellite receiver (SAT), DVD or TIVO
digital video disk player.
SPECIFICATIONS
Operating System: Pre-programmed
infrared remote control system.
Compatibility: Replaces most brands of
IR (infrared) remote controls for the TVs,
VCRs, Cable/Satellite systems, DVD and
TIVO.
Power Requirement: 2 AA size batteries,
alkaline recommended.
Size: 2-5/8:W x 9-1/2"L x 2-1/4"H
FEATURES
TV, VCR, CABLE/SAT, DVD and TIVO
Modes. Simply press the desired DEVICE
MODE button (TV, VCR, CBL /SAT, DVD or
TIVO) once to select the operation MODE.
CODE NUMBER ENTRY. The ability to easily
select the TV, VCR, CBL /SAT, DVD or TIVO
device you wish to control.
CODE NUMBER RECALL. The ability to
display the code number of the currently
selected TV, VCR, CBL /SAT, DVD or TIVO
device on the status indicator light.
POWER SCAN. The ability to search through
the TV, VCR, CBL /SAT, DVD or TIVO code
library for a code that will operate your device.
POWER SCAN MODEL CHECK. Expands
the ability of regular Power Scan by allowing
the user to remain in scan mode and test any
valid button for the TV, VCR, CBL /SAT, DVD
or TIVO device being scanned.
MASTER POWER. The ability to turn on/off
all TV, VCR, CBL /SAT, DVD or TIVO devices
at the same time upon press and release of
the ON/OFF button. This feature is user pro-
grammable to be enabled or disabled.
VOLUME PUNCH -THROUGH. You can
control the volume of your TV when you are
in another device mode. This feature is a user
programmable selection
TABLE OF CONTENTS
Introduction 1
Feature List 1
Specifications 1
Setting up your BIG BUTTON™ 2
-Installing the Batteries 2
-Using Device Codes 2
-Using Power Scan (Searching) 2-3
-Using ID Recall 3
-Setting Punch-Through 3
-Enabling Master Power 4
Operating BIG BUTTON™ 4
Care & Maintenance 4
Troubleshooting 8
Device Code Lists 5-7
-TV 5
-VCR 5-6
-Cable 6-7
-Satellite 7
-DVD 7
-TIVO 7
USER MANUAL BW-1220US