Intel P0307-ND Network Card User Manual


 
All prices in Canadian dollars and include duty and brokerage fees.
1-800-344-4539 • ca.digikey.com • 218-681-6674 • Fax: 218-681-3380
598
(C083)
C
The Video Development Kit, Cyclone II Edition, featuring the Texas Instruments (TI) TVP5146 Family of
video analog-to-digital (A/D) converters, delivers a complete development environment for digital video and
image processing. The kit facilitates the entire design process from design conception through hardware
implementation. The Video Development Kit, Cyclone II Edition includes the Cyclone II DSP development
board, Altera’s video input daughter card, DSP Builder development tool, Quartus II development software,
evaluation intellectual property (IP) cores, system reference designs and labs, as well as power supplies,
cables and documentation.
Kit Includes:
Cyclone II EP2C70 DSP development board: Cyclone II EP2C70F672C6 device • Video input daughter
card: • Composite video input channels TI TVP5146 (Supports NTSC/PAl, 10-bit BT.656 output) • Analog
I/O: • Two 14-bit, 125-MSPS analog-to-digital (A/D) converter - TI ADS5500 • Two 14-bit 165-MSPS
digital-to-analog (D/A) converter - TI DAC904 • VGA digital-to-analog converter (D/A) • Stereo audio
coder/decoder (CODEC), 96kHz • Digital I/O: • EMIF connector for TI’s C6000 DSP Starter Kit (DSK) to
enable peripheral expansion and FPGA co-processing • MICTOR connector for Agilent and Tektronix logic
analyzers • Expansion prototyping connector • Memory: • 256-Mbyte DDR2 DIMM • 1-Mbyte synchronous
SRAM • Two EPCS64 devices • MATLAB/Simulink Evaluation SoftwareDSP Builder development
tool Quartus II DKE • Evaluation IP cores • System reference designs and labs: • Video and image
pro cessing reference design • DSP Builder  ltering design • DSP Builder/SOPC Builder image processing
reference design • Fast Fourier transform (FFT) coprocessor reference design for TI’s TMS320C6416DSK
• Nios II reference designs • DDR2 DIMM reference design • Cables and accessories: • USB-Blaster
download cable • Power supply • International power cords
544-1703-ND (DK-VIDEO-2C70N) ....................................................................$1181.51
Video Development Kit,
Cyclone
II Edition
Altera’s Nios II Development Kit, Cyclone II Edition provides everything needed for system-on-a-pro gram-
mable-chip (SOPC) development. Based on Altera’s Nios II family of embedded processors and the low cost
Cyclone II EP2C35 device, this development kit provides an ideal environment for developing and proto-
typing a wide range of price sensitive embedded applications.
Kit Includes:
Nios II family of embedded processors • Nios II development tools, including: • Nios II integrated
development environment (IDE) and debugger • GNU tools • Nios II instruction set simulator (ISS)
MicroC/OS-II real-time operating system with development licenseLightweightIP TCP/IP stack
• Quartus II design software, including the SOPC Builder system development tool • Library
of standard microprocessor peripherals • RoHS-Compliant development board: • Cyclone II
EP2C35F672 device • MAX EPM7128AE CPLD configuration control logic • 1-Mbyte synchronous
SRAM • 16-Mbyte DDR SDRAM • 16-Mbyte  ash memory • EPCS64 serial con guration device (64 Mbit)
• CompactFlash connector header for Type I CompactFlash cards (40 available) • 10/100 Ethernet physical
layer/media access control (PHY/MAC) • Ethernet connector (RJ-45) • One serial connector (RS-232 DB9
port) • Two expansion/prototype headers (2 x 41 available user I/O pins) • JTAG connectors for FPGA and
CPLD • Mictor trace/debug connector • One set PMC headers (32-bit) • Four user-de ned push-button
switches • Eight user-de ned LEDs • Dual 7-segment LED display • Power-on reset circuitry • Cables
and accessories: • USB-Blaster Rev B download cable • Serial cable (RS-232) • 9-V power supply • Inter-
national power cords • LCD module • Ethernet (RJ45) cable (7 feet) • Ethernet crossover adapter • Many
hard ware and software reference designs targeted to the Nios development board Cyclone II edition
• One-year subscription to Nios II processor-related tool upgrades • There are no license or royalty
fees connected with the Nios II development kit used to develop with Altera FPGA’s and HardCopy
series structured ASICs • Coupon for a 20% discount on any one instructor-led Altera Technical
Training course scheduled in North America
544-1698-ND (DK-NIOS-2C35N) ......................................................................$1073.61
Nios
®
II Development Kit,
Cyclone
II Edition
The Cyclone II EP2C35 PCI Express Development Board provides a hardware platform for developing and
prototyping PCI Express, DDR2 SDRAM, and the 10/100/1,000 Ethernet interface. Based on Cyclone II
FPGAs and using Altera MegaCore functions or your own IP, Cyclone II EP2C35 PCI Express Development
Board allows users to quickly solve design problems that typically require time-consuming and custom
solutions.
649-1001-ND (KS-ALT-2C35-30) ......................................................................$1618.50
PCI Development Kit
with Cyclone
II
The Video Input Daughter Card from Altera enables composite video to be interfaced with Altera’s or third
party partner FPGA development board equipped with a standard expansion connector. It is ideal for
developing applications with the Video and Image Processing Solutions that need to perform any image
processing. The daughter card is included as part of the Video Development Kit, Cyclone II Edition and it
can be purchased as a separate item.
Features: • 2 Composite Video Input Channels using the Texas Instruments (TI) TVP5146 ADC • Support
for NTSC/PAL • 10-bit BT.656 Output • Compatibility with expansion connector, standard on most Altera
development kits
544-1704-ND (DK-VIDEO-TVP5146N) .................................................................$210.41
Video Input Daughtercard
The DSP Development Kit, Cyclone II Edition provides everything you need to develop complete system-on-
a-programmable-chip (SOPC) solutions.
Kit Includes:
• Cyclone II DSP Development Board with and EP2C70 device • DSP Development Kit, Cyclone II Edition
Version 6.0.1 CD-ROM • DSP Builder Version 6.0.1 CD-ROM • The MathWorks MATLAB and Simulink
CD-ROM Release 2006a (2006a) • Quartus II Software Development Kit Edition (DKE) version 6.0 SP1
CD-ROM • Nios II Embedded Processor Windows Evaluation Edition version 6.0.1 CD-ROM • IP MegaCore
Library version 6.0.1 CD-ROM • SLP-50 anti-aliasing  lter from Mini-Circuits • SMA Cable • USB-Blaster
down load cable and USB cable • Power supply and adapters for North America/Japan, Europe and the
United Kingdom • Quartus II Design Software Installation and Licensing for PCs manual
544-1699-ND (DK-DSP-2C70N) .......................................................................$1073.61
DSP Development Kit,
Cyclone
II Edition
The Nios II Embedded Evaluation Kit, Cyclone III Edition, is a  rst class, low cost evaluation platform for
embedded developers. Software developers, especially those new to FPGA design, can install and evaluate
the Nios II Embedded Design Suite (EDS) - a comprehensive software development suite for embedded
ap plications - all at no cost. The included software tutorials and examples come with full source code
showing applications such as Picture Viewer, Web Server, C-to-Hardware (C2H) acceleration and graphics.
Kit Includes:
CYCLONE III STARTER BOARD: Cyclone III EP3C25F324 FPGA • Configuration: Embedded USB-
Blaster™ circuitry (includes an Altera EPM3128A CPLD) allowing download of FPGA configuration files
via the user’s USB port • Power and analog devices from Linear Technology: • Switching power supply
LTM4603EV-1 • Switching and step-down regulators LTC3413, LT1959 • Memory: • 32 Mbytes of DDR
SDRAM • 1Mbyte of Synchronous SRAM • 16Mbytes of Intel P30/P33 flash Clocking: 50 MHz on-board
oscillator • Switches and indicators: • Six push buttons total, four user controlled • Seven LEDs total,
four user controlled • LCD DAUGHTER CARD: Color LCD touch-screen display: 800 x 480 resolution
24-bit CD quality Audio CODEC with line-in, line-out, and microphone-in jacks10/100 Ethernet
physical layer/media access control (PHY/MAC) Connectors: • VGA output • Composite TV-in
• Audio-out, audio-in, and microphone-in • Secure digital (SD) card • Serial connector (RS-232 DB9 port)
• PS/2 • Ethernet connector (RJ-45) • NIOS II EVALUATION KIT CD-ROM:Example applications:
• Application selector • Picture viewer • Mandelbrot acceleration with the Nios C2H compiler • Web server/
Remote FPGA configuration • Hardware tutorials: • Create an FPGA design in one hour • Build a 32-bit
soft processer system inside an FPGA Software tutorials: My First Software Application • Complete
documentation: • Quick start guide • User guide • Reference manual • Board schematic, layout, and bill
of materials • Product and partner information • CABLES AND ACCESSORIES • 128-Mbyte SD card and
USB-to-SD card adapter • USB cable • 9V power supply • International power cords • Ethernet (RJ-45)
cable (7 ft.) • Ethernet crossover adapter • ALTERA COMPLETE DESIGN SUITE DVD (Free): Quartus
®
II Web Edition (FPGA design software) • ModelSim
®
Altera Web Edition (FPGA simulation software from
ModelSim) • Nios II Embedded Design Suite (32-bit microprocessor software) • MicroC/OS-II real-time
operating system evaluation • Nios II C-to-Hardware acceleration compiler evaluation • NicheStack TCP/IP
Network Stack - Nios II Edition evaluation • MegaCore
®
IP Library (Library of intellectual property cores)
544-2411-ND (DK-N2EVAL-3C25N-OB) ...............................................................$484.47
Nios
®
II Embedded Evaluation Kit,
Cyclone
III Edition
NEW!
DE2 Development and
Education Board
Specifications: FPGA: • Cyclone II
EP2C35F672C6 FPGA and EPCS16
serial con guration device I/O Devices:
• Built-in USB Blaster for FPGA con guration • 10/100
Ethernet, RS-232, Infrared port • Video Out (VGA 10-bit
DAC) • Video In (NTSC/PAL/Multi-format) • USB 2.0
(type A and type B) • PS/2 mouse or keyboard port
• Line-in, Line-out, microphone-in (24-bit audio CODEC)
• Expansion headers (76 signal pins) Memory: • 8MB
SDRAM, 512KB SRAM, 4MB Flash • SD memory card
slot Switches, LEDs, Displays and Clocks: • 18 toggle
switches • 4 debounced pushbutton switches • 18 red
LEDs, 9 green LEDs • Eight 7-segment displays • 16 x
2 LCD display • 27MHz and 50MHz oscillators, external
SMA clock input
P0301-ND (P0301) ................................................................................... $534.11
Note: Academic pricing available; call Digi-Key for pricing.
DE1 Development and Education Board
Specifications: FPGA: • Cyclone II
EP2C20F484C7 FPGA and EPCS4 serial
con  g ur ation device I/O Devices: • Built-in
USB Blaster for FPGA con guration RS-232 port • VGA DAC
resistor net work (4096 colors) • PS/2 mouse or keyboard
port • Line-in, Line-out, microphone-in (24-bit audio CODEC)
• Ex pan sion headers (76 signal pins) Memory: • 8-MB
SDRAM, 512KB SRAM, 4MB Flash • SD memory card slot
Switches, LEDs, Dis plays and Clocks: • 10 toggle switches
• 4 debounced push button switches • 10 red LEDs, 8 green
LEDs • Four 7-segment dis plays • 27MHz and 50MHz
oscillators, external SMA clock input
P0528-ND (P0528) ................................................................................... $171.97
DE2-70 Development and
Education Board
Includes: • Altera Cyclone
®
II 2C70 FPGA device
• Altera Serial Con  g u r ations device EPCS16 • USB
Blaster (on board) for pro gram ming and user API control;
both JTAG and Active Serial (AS) pro gram ming modes
are supported • 2-Mbyte SSRAM • Two 32-Mbyte
SDRAM • 8-Mbyte Flash memory • SD Card socket
• 4 pushbutton switches • 18 toggle switches • 18 red
user LEDs • 9 green user LEDs • 50MHz oscillator and
28.63MHz oscillator for clock sources • 24-bit CD-quality
audio CODEC with line-in, line-out and microphone-
in jacks • VGA DAC (10-bit high-speed triple DACs)
with VGA-out connector • 2 TV Decoder (NTSC/PAL/
SECAM) and TV-in connector • 10/100 Ethernet Controller with a connector • USB Host/Slave Con trol ler
with USB type A and type B connectors • RS-232 transceiver and 9-pin connector • PS/2 mouse/key board
connector • IrDA transceiver • 1 SMA connector • Two 40-pin Expansion Headers with diode protection
P0304-ND (P0304) ................................................................................... $646.32
Note: Academic pricing available; call Digi-Key for pricing.
Digital Development Kits and Sensor
P0424-ND: The TRDB_LCM Kit provides everything you need to develop applications using
a digital panel on the Altera DE2 board and Altera Cyclone II FPGA Starter Development
Kit (CII Starter Kit). Kit Includes: • Complete reference designs and source code for
implementing a TV player or a Color Pattern Generator using TRDB_LCM and Altera DE2/CII Starter Kits.
P0307-ND: The 4.3” Ultra-high Resolution LCD Touch Panel Development Kit provides users an 800 x 480
full-color high-quality LCD Touch Panel with complete reference designs with source code to allow users
to develop applications using a touch panel on the Altera DE2-70/DE2/DE1 boards and Altera Cyclone II/
Cyclone III Starter Kits.
P0349-ND: The TRDB_DC2 1.3 Mega Pixel Digital Camera module that provides everything you need
to build a 1.3 Mega Pixel Digital Camera on the Altera DE2/DE1 board and CII Starter Kit. Kit Includes:
• TRDB_DC2: 1.3 Mega Pixel Daughter card • Complete reference design with source code in Verilog
• User Manual with Live Demo examples Note: Must use M0344-ND with this module.
M0344-ND: This CMOS Sensor is to be used with P0349-ND.
P0424-ND (P0424) 3.6 Inch Digital Panel Development Kit ........................................ $106.82
P0307-ND (P0307) 4.3 Inch Digital Touch Panel Development Kit ................................$183.43
P0349-ND (P0349) 1.3 Mega Pixel Digital Camera Development Kit ................................$75.53
M0344-ND (M0344) Sensor for use with P0349-ND ..................................................$21.58