Filter
Top Products
The 600-HP is a self-powered, high-output
subwoofer that may be used in both flown and
ground-stacked configurations. It is available
in three versions: as a portable version with
handles, for installation without handles, or
with rigging hardware. When fitted with the
optional QuickFly MRF-600 rigging frame, the
600-HP is designed to rig directly with the
MICA compact, high-power curvilinear array
loudspeakers. The versatility of the 600-HP
also allows it to be used with a variety of other
Meyer Sound self-powered loudspeakers —
including the CQ-1, CQ-2, UPA-1P, UPA-2P and
UPJ-1P — in fixed and touring applications.
The system features two specially designed
high-power 15-inch cone drivers, engineered
to provide optimal performance in subwoofer
applications. The high-excursion, back-vented
drivers have 4-inch voice coils, and each is
rated to handle 1200 watts (AES)*.
The two cone drivers are housed in a rectangu
-
lar, optimally tuned and vented enclosure that
is the same width as MICA, and a few inches
higher and deeper. The enclosure geometry
makes vertical ground-stacking easy and con
-
venient. All versions include plastic skids on
D AT AS H EE T
the bottom of the unit to prevent damage to
the enclosure or the unit below; the skids align
with slots on the cabinet’s top to ensure secure
stacking.Operating frequency range is from 36
Hz to 150 Hz, with a peak SPL at one meter of
138 dB.
Each cone driver is driven by a channel of the
integral two-channel class AB/H amplifier with
complementary MOSFET output stages. Total
output power is 2250 watts (4500 watts peak),
providing the system with sufficient headroom
to accommodate the most extreme sound rein
-
forcement demands with ease. The circuitry
includes TruPower
®
limiting to extend the
life of the drivers and hold long-term power
compression to less than 1 dB. The amplifier,
control electronics, and power supply are inte
-
grated into a single, field-replaceable module
that is mounted into the rear of the enclosure.
The optional MRF-600 rigging frame uses
captive, rigid GuideALinks contained within
recessed guides in the lower front and rear
corners of the enclosure. A slot and convenient
pinned handle allow the link to be moved and
pinned for arraying or storage. The versatility
of angles achieved by using combinations of
C ON CE R T S ER I ES
41.40" w x 22.50" h x 22" d
(1052 mm x 572 mm x 559 mm)
182 lbs (82.55 kg); with rigging: 215 lbs (97.52 kg)
Premium birch plywood
Black textured
Powder-coated, hex stamped steel lined with acoustical
black mesh
Optional end-mounted QuickFly
®
rigging hardware, with
captive GuideALinks™ on the bottom four corners and
quick-release pins; compatible with MICA™ compact high-
power curvilinear array loudspeakers and accessories
Dimensions
Weight
Enclosure
Finish
Protective Grille
Rigging
front and back positions allows a MICA array
suspended under 600-HP subwoofers to be
uptilted for balcony coverage up to 15 degrees,
or downtilted to 6 degrees with respect to
the 600-HP. The 600-HP can make use of the
optional MG-MICA rigging grid to accommodate
a variety of flown and stacked configurations.
The durable enclosure is constructed of pre
-
mium birch plywood coated with a black, tex
-
tured hard-shell finish, with a powder-coated,
hex-stamped steel grille lined with acoustical
black mesh to protect the drivers. The exterior
dimensions of the 600-HP are suitable for both
European and U.S. trucks, and it can securely
travel in stacks using the MCF-MICA caster
frame, or MDB-600 dolly board when not fitted
with rigging frames.
Options for the 600-HP include weather pro
-
tection and custom color finishes for fixed
installations and other applications requiring
specific cosmetics. The RMS™ remote monitor
-
ing system — standard with the rigging ver
-
sion and optional with other configurations
— allows comprehensive monitoring of system
parameters on a Windows
®
-based network.
Efficient, high-power and high-excursion cone
drivers
Extremely low distortion for low-frequency
clarity
Very high peak power yields excellent transient
reproduction
Low-frequency complement to MICA and other
Meyer Sound self-powered loudspeakers
features & benefits
Stackable, and flyable by itself or with MICA
full-range loudspeakers
Transportable in stacks using optional
MCF-MICA caster frame
applications
Medium to large theatres and clubs
Houses of worship
Portable and installed A/V systems
600-HP : Compact High-Power Subwoofer
600-HP shown with optional
QuickFly MRF-600 rigging frame
43.87
[1114.37 mm]
41.40
[1051.56 mm]
22.97
[583.51 mm]
22.50
[571.44 mm]
22.00
[558.75 mm]
11.25
[285.72 mm]
15.08
[382.93 mm]
6.90
[175.22 mm]
18.46
[468.84 mm]
10.50
[266.70 mm]
12.00
[304.80 mm]
43.87
[1114.37 mm]
41.40
[1051.56 mm]
22.97
[583.51 mm]
22.50
[571.44 mm]
22.00
[558.75 mm]
11.25
[285.72 mm]
15.08
[382.93 mm]
6.90
[175.22 mm]
18.46
[468.84 mm]
10.50
[266.70 mm]
12.00
[304.80 mm]
When fitted with MRF-600 rigging frames:
*
Driven continuously for twohours with a band-limited noise signal
having a 6 dB peak-to-average ratio
.