Verbatim 97253 Mouse User Manual


 
Wireless Travel Mouse with Stow-Away Receiver
User Manual
Product Features
1. Radio frequency 27MHz wireless transmission
2. Use of 256 ID codes to prevent interference between several wireless mice being used
simultaneously
3. Automatic power sleep function to extend battery life
4. Storage area for receiver in the mouse
System Compatibility
Win 95/98/Me/2000/XP
Macintosh 9.x, 10.x
Initial Set up
1. Turn the computer power on and log in
2. Connect wireless mouse receiver to USB port
3. Ensure batteries are installed in the mouse and mouse power is turned on (See
instructions below).
4. Hold mouse close to the receiver
5. Using a pen or other pointed device click the ID button on the receiver once, (See Figure
1 below). The red light will start to flash
6. Next, click the ID button on the underside of the mouse as indicated in Figure 1
Figure 1
7. The red light on the receiver will flash rapidly for a few seconds then stop flashing