Victory Refrigeration RFA-1D-S7 Refrigerator User Manual


 
Dual Temp Refrigerator/Freezers
Cabinet:
Victory's dual temperature model provides
storage of both refrigerated and frozen
foods within a single cabinet. An insulated
partition between the cabinet sections
ensures temperature integrity of each
product zone. The cabinet front and doors
are constructed of heavy gauge polished
stainless steel to maintain an attractive
appearance after years of heavy use.
Foamed-in-place polyurethane insulation
throughout the cabinet and doors ensures
the ultimate in energy efficiency.
Doors:
The self-closing doors are securely mounted
on rugged cam-lift hinges, which have a
lifetime guarantee. Each door has a heavy-
duty cylinder lock and self-adjusting
magnetic gasket to prevent the cold air from
escaping. Humidity control wires located
around the door jamb prevent condensation
from forming on the cabinet front and are
concealed by a high impact, non-conductive
thermal breaker strip. The interior door liner
is constructed of durable ABS material,
which resists denting and scratching and is
easy to clean. Each safety grip handle is
guaranteed for life. Interior lighting is
controlled automatically by a switch mounted
in the hinge.
Shelving:
The heavy-duty wire shelves are adjustable in
one-inch increments. A wide door opening
allows the use of a variety of optional pan
slide types for 12" x 20", 18" x 26", and 14" x
18" pans and trays.
Refrigeration System:
The two-section model is equipped with two
self-contained independent refrigeration
systems mounted on top of the cabinet. The
air circulating fans and the forced convection-
cooling coil are contained in an insulated
housing separate from the product zone
allowing for maximum food storage capacity.
All condensate water is disposed of
automatically by the energy efficient
condensate vaporizer (installation required
on site), no plumbing is required.
RFS and RFSA Models
• Digital Thermometer/Battery Back-up
• Adjustable Stainless Steel Legs
RFA Models
• Dial Thermometer
• Adjustable Legs
Standard Features (all models)
• Energy Saver Switches
• Stainless Steel Case Front and Doors
• Lifetime Heavy-Duty Cam Lift Hinges
• Adjustable Wire Shelves
• Lifetime Safety Grip Handles
• Self-Closing Doors with Safety Stops
• Flush-Mounted Automatic Interior Lighting
• Insulated Partition Wall Separates
Compartments
• Energy Saving Thermal Breaker Strips
• Door Opening Accepts 12" x 20" and 18" x
26" Pans
• Heavy-Duty Cylinder Locks
• One Piece Self-Adjusting Magnetic Door
Gaskets
• High Impact ABS Interior Door Liner
• Plasticized Fin Coil
• Environmentally Friendly R-134a Refrigerant
• Environmentally Friendly R-404A Refrigerant
• Condensate Automatically Evaporated
• Automatic Defrost
• Cord and Plug Attached on 115 V Two
Section Models 12 Amps or Less
Optional Features and Accessories
• Dial or Digital Thermometer
• Two Half Doors In Place of One Full Length
Door on Two Section Model
• Full and Half Size Hinged Glass Doors with
Cylinder Locks
• Change Door Swing
• Adjustable Stainless Steel Wire Shelves
• Stainless Steel Angle Pan Slides
• Zinc Plated Wire Pan Slides
• 5" Diameter Heavy Duty Swivel Casters with
Brakes
• Stainless Steel Case Back
• Remote and Pass-Thru Models
NOTE: Single section model cooling coil is
contained within a ceiling mounted low
profile housing
RFS MODELS —
Stainless steel
exterior and
interior.
RFS-1D-S7
RFS-2D-S7
RFSA-1D-S7
RFSA-2D-S7
RFSA MODELS —
Stainless steel
exterior.
Aluminum interior.
RFS-22D-SS7
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: 856.428.4200 I Fax: 856.428.7299 I E-mail: sales@victory-refrig.com
Victory Refrigeration specification sheets
are available online at www.victory-refrig.com.
Project:
Location:
Item #:
Quantity:
RFA-1D-S7
RFA-2D-S7
RFA MODELS —
Stainless steel fronts
and doors. Aluminum
sides and interior.
Half
Door,
Pass-TThru
and
Remote
Models
Available