1. Manuals
  2. Consumer Electronics Support
  3. Radio Shack Support
  4. Thermometer Support
Support User Manuals
Question About Radio Shack Thermometer Cat No. 63-1033
Wireless Thermometer - It beeps 3 times about ever...

Wireless Thermometer - It beeps 3 times about every 30 seconds when the temperature drops below freezing. It continues this all night long! How can I program this unit to not do this? Thanks

Asked by Jerry on 01/19/2015 3  Answers

ManualsOnline posted an answer 9 years, 3 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Dave posted an answer 7 years, 1 month ago

2 It only beeps on channel 1. Switch to channel 2 or 3. Then, remove the battery in the remote sensor and change the channel to 2 or 3. If you're using all 3 channels, switch the channel 1 sensor with one that's not within earshot. If that isn't possible, remove the batteries from the monitor unit and the 4 tiny screws (you'll need the inexpensive Phillips head screwdriver in most eyeglass repair kits). 2 of the screws are where the batteries were and 2 at the top. Remove the back portion, exposing the circuitboard. At the bottom, partially under the circuitboard, is the metallic, dime size speaker. Cut one of the 2 black wires going to it. No more beep, enjoy the silance. Good luck - Dave
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual