Filter
Top Products
5/8-Port Fast Ethernet Switches
with 1 Fiber Connection
KS-105F, KS-108F
Specifications :
Key Features :
Provide 4/7 10/100Mbps Fast Ethernet Switch ports and 1 100Base-FX port
Each TP port supports auto-negotiation and auto-MDI/MDI-X detection
For the 100Base-FX fiber port, the switch series supports variety of fiber connectors for different
application needs. The fiber connectors include ST, SC, MT-RJ, LC and VF-45 types for
multimode and single mode fiber cables
Support duplex mode selector for the 100BASE-FX fiber port
Self learning for active MAC addresses and address aging
Store-and-forward switching to ensure only good packets are forwarded
Forwarding and filtering at full wire speed
Support IEEE 802.3x flow control for full-duplex mode and backpressure flow control for half-
duplex mode
Comprehensive LED indicators provide quick, easy to read port and switch information
10/100 Ports IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX std.
Shielded RJ-45 jacks with Auto MDI-X detection
Auto-negotiation capable
Speed for 10Mbps or 100Mbps
Full-duplex or half-duplex mode support
100FX Port IEEE 802.3u 100BASE-FX compliant
Fixed 100Mbps operation
Duplex mode selector - full-duplex or half-duplex
Flow control IEEE 802.3x pause packet for full-duplex operation
Back-pressure for half-duplex operation
Cables 10Base-T : Cat. 3, 4, 5 or higher (100 meters max.)
100Base-TX : Cat. 5, 5e or higher (100 meters max.)
100Base-FX : multimode or single mode fiber cable
LEDs Power status
Per port : Speed, Link, Activity, Duplex, Collision status
Forwarding rate 14,880 pps for Ethernet (10M)
148,800 pps for Fast Ethernet (100M)
Filtering address Multicast/Broadcast/Unicast address
MAC Address Table 1K entries
Aging time KS-105F : 300 seconds
KS-108F : 240 seconds
080110