Mitsubishi Electronics WD-52628 Projection Television User Manual


 
Design specifications are subject to change without notice.
MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.
9351 Jeronimo Road, Irvine, CA 92618-1904
Copyright © 2005 Mitsubishi Digital Electronics America, Inc.
All Rights Reserved
CAUTION:
Before servicing this chassis, it is important that the service person read the "SAFETY PRECAUTIONS" and
"PRODUCT SAFETY NOTICE" contained in this manual.
SerSer
SerSer
Ser
vicevice
vicevice
vice
ManualManual
ManualManual
Manual
20052005
20052005
2005
MITSUBISHI ELECTRIC
DLP PROJECTION HDTV
V29 / V30 / V30+ / V31 CHASSIS
SPECIFICATIONS
Power Input : AC 120V, 60Hz
Power Usage : See table on page 5
Light Engine : DLP
TM
(1920 x 1080 pixels)
Light Source : 120W [V29,V30(52"&62")]
: 150W [V30(73"),V30+,V31]
Channel Range : Air VHF - 2~13, UHF - 14~69
Analog Cable - 1~25
Digital Cable - 1~35
Antenna Input : 2 RF 75unbalanced
Tuning (V29,V30) : 1 NTSC/ATSC/QAM
1 Out of Band for CableCARD
TM
1 NTSC for PIP
Tuning (V30+, V31) : 2 NTSC/ATSC/QAM
1 Out of Band for CableCARD
TM
2 NTSC for PIP
Cabinet Dimensions : See Table on page 5
Weight : See table on page 5
• Speakers (8 Ohms 10W)
: Two 1.5" Round
Two 5.5"x2.2" Oval
• Input Level : VIDEO IN JACK (RCA Type)
1.0Vp-p 75 unbalanced
: AUDIO IN JACK (RCA Type)
-4.7dBm 43kunbalanced
: S-VIDEO IN JACK
(Y/C separate type)
Y:1.0 Vp-p C:0.286Vp-p(BURST)
75 unbalanced
: COMP / Y, Cr, Cb (RCA Type)
Y: 1.0 Vp-p Cr, Cb: 700mVp-p
• Output Level : VIDEO OUT JACK (RCA Type)
1.0Vp-p 75 unbalanced
: AUDIO OUT JACK (RCA Type)
-4.7dBm 4.7k unbalanced
• Digital : IEEE-1394 I/O Jacks
: Digital Audio Output
(RCA Type)
: HDMI
TM
:
MonitorLink
TM
RS-232 Control
: Memory Card Reader
: Lead-Free solder PWBs
WD-52327
V29 Chassis
WD-52627
WD-62627
V30 Chassis
WD-52628
WD-62628
WD-73727
WD-52527
Pb Solder
Pb Solder
WD-62827
V30+ Chassis
WD-62827
WD-73827
V31 Chassis
WD-62927
WD-73927