Shark EP732F Water Dispenser User Manual


 
Style # XSH732
for Model EP732F
1 HEPA Filter
Style # XSH732
for Model EP732F
1 HEPA Filter
Warning: To reduce the risk of electric shock, the power cord must be
disconnected before removing the dust cup, changing or
cleaning the HEPA filter or performing maintenance/trouble
shooting checks.
Warning: To reduce the risk of electric shock, the power cord must be
disconnected before removing the dust cup, changing or
cleaning the HEPA filter or performing maintenance/trouble
shooting checks.
Top Rim
Stem
Warning: After each Use - Always
remove the Rinseable "TapClean" HEPA
Filter from the Dust Cup, then vigorously
TapClean” HEPA Filter until no more
dust can be removed.
Important: When "TapCleaning" the
HEPA filter, hold the HEPA filter from the
stem and tap ONLY the top rim against
the side of the waste container. NEVER
tap directly on the pleated folds of the
HEPA filter.
3. After you have removed the dust cup
cover from the dust cup container,
hold the dust cup
handle with one
hand and twist the
HEPA filter counter
clockwise holding it
from the filter stem
to remove from
the dust cup cover.
4. After you have
removed the
Rinseable “TapClean”
HEPA dust cup filter from
the dust cup, separate the
debris screen from the
HEPA filter cartridge by
holding the top rim of the
filter and twisting the
debris screen counter-
clockwise to unlock the
debris screen from the
filter. Then lift the debris
screen to remove.
Open
Lock
Twist
5. Rinse the debris screen
under the faucet with
lukewarm water until
clean. Allow to air dry for 24 hours.
Do NOT wash in dishwasher.
6. To replace the debris screen onto the
filter, slip the debris screen over the
filter and twist clockwise to lock in
place.
To remove the dust cup container
from the vacuum:
1. Lift the dust cup handle and lift the
dust cup container out.
2. To remove the Rinseable
“TapClean” HEPA dust
cup filter from the
dust cup container,
hold the dust cup
container from the
handle and turn
counter clockwise
to release the dust
cup cover.
EURO-PRO Operating LLC
U.S.: 94 Main Mill Street, Door 16 Canada: 4400, Bois-Franc
Plattsburgh, NY 12901 St-Laurent, QC H4S 1A7
Tel. : 866-98shark
www.sharkvac.com
Cleaning the Rinseable "TapClean" HEPA Dust Cup Filter & Debris Screen
Top Rim
Stem
Warning: After each Use - Always
remove the Rinseable "TapClean" HEPA
Filter from the Dust Cup, then vigorously
TapClean” HEPA Filter until no more
dust can be removed.
Important: When "TapCleaning" the
HEPA filter, hold the HEPA filter from the
stem and tap ONLY the top rim against
the side of the waste container. NEVER
tap directly on the pleated folds of the
HEPA filter.
3. After you have removed the dust cup
cover from the dust cup container,
hold the dust cup
handle with one
hand and twist the
HEPA filter counter
clockwise holding it
from the filter stem
to remove from
the dust cup cover.
4. After you have
removed the
Rinseable “TapClean”
HEPA dust cup filter from
the dust cup, separate the
debris screen from the
HEPA filter cartridge by
holding the top rim of the
filter and twisting the
debris screen counter-
clockwise to unlock the
debris screen from the
filter. Then lift the debris
screen to remove.
Open
Lock
Twist
5. Rinse the debris screen
under the faucet with
lukewarm water until
clean. Allow to air dry for 24 hours.
Do NOT wash in dishwasher.
6. To replace the debris screen onto the
filter, slip the debris screen over the
filter and twist clockwise to lock in
place.
To remove the dust cup container
from the vacuum:
1. Lift the dust cup handle and lift the
dust cup container out.
2. To remove the Rinseable
“TapClean” HEPA dust
cup filter from the
dust cup container,
hold the dust cup
container from the
handle and turn
counter clockwise
to release the dust
cup cover.
EURO-PRO Operating LLC
U.S.: 94 Main Mill Street, Door 16 Canada: 4400, Bois-Franc
Plattsburgh, NY 12901 St-Laurent, QC H4S 1A7
Tel. : 866-98shark
www.sharkvac.com
Cleaning the Rinseable "TapClean" HEPA Dust Cup Filter & Debris Screen