Wind Crest VEN150E Ventilation Hood User Manual


 
Copyright 2006 Wind Crest by CNP Industries 1
Install Quick Specs are for planning purposes only. Please refer to the detailed installation
instructions, prior to making any cutouts.
Externally Mounted Ventilators – Install Quick Specs
VEN150E
Installation Type & Discharge Direction
Mounted outside. Can be mounted on exterior
roof or wall.
CFM Rating
1500 CFM
Minimum Duct Size
10” round
Maximum Equivalent Straight Duct Length
50 feet
Equivalent Straight Lengths
1 foot of 8” or 10” duct = 1 foot
1 foot of 3 ¼” x 14” rectangular = 1 foot
8” round 90 degree Elbow = 5 feet
10” round 90 degree Elbow = 3 feet
Wall or Roof Cap = 2 feet
Standard Features
Adaptable to all Wind Crest hoods
Weather-resistant glavanized steel
construction
Thermally protected, permanently
lubricated motor
Dynamically balanced 12” diameter blower
wheel
Neoprene resilient anti-vibration mounted
Built-in Flashing plate for roof or wall mount
Easily removed blower cover for periodic
cleaning
Ventilator Motor Ratings*
Hoods without Heat Lamps:
12.0 Amps @ 120 V AC, 60 Hz
Hoods with Heat Lamps:
16.4 Amps @ 120 V AC, 60 Hz
*20 Amps @ 120 V AC, 60 Hz required when
using VEN150E ventilator.
Ventilator Carton Weight:
VEN150E = 80 lbs.
7"
4"
24
"
3
0
"
U
L
U
L
LISTED 7Z66 C
VEN150E