1. Manuals
  2. Consumer Electronics Support
  3. Night Guard Home Surveillance System Support
  4. Remote Starter Support
Support User Manuals
Question About Night Guard Home Surveillance System Remote Starter Xt - 43LCD
Change battery and remote won't work...

Change battery and remote won't work

Asked by Curtis marker on 02/04/2014 1  Answer

ManualsOnline posted an answer 10 years, 3 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Rewarder User posted an answer 10 years, 1 month ago

5 REMOTE TRANSMITTER PROGRAMMING Enter: 1. Turn the Ignition 'switch ‘OFF/ON’ 3 TIMES and stay in ON position. Within 15 seconds. 2. Push the Valet switch 2 times and hold in on the 2nd push, when a long chirp is heard then release the valet switch. You are now in the Transmitter programming mode. Program: 1. Press the Lock button on transmitter 1 until the siren responds on Car with a confirming chirp; the first transmitter is now programmed to Car. Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps will confirm exit. Note: If more than 4 transmitters programmed, the system will only keep the last four. The Valet switch is a little Red Push Button that should be mounted under the lower left side of you dash or in the lower left kick panel near the E-brake pedal
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual