Hi,How do I get my Rinnai FTR off Child lock and Timer and get it back to where I can operate the temperature manually?

Asked by PAMELA on 06/28/2014 1  Answer

ManualsOnline posted an answer 9 years, 10 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
5 Please follow the below procedures and see whether they can be of any help: There are two test points, one on the heat exchanger, one n the gas manifold. Connect pressure gauge to both test points. (Connect one side of the gauge to one point the other side of the gauge to the other.) If you are using an electronic manometer, connect the –ve side to the heat exchanger test point. Press the ON/OFF button to operate unit. With the appliance operating, press SW5 once. Press SW4 to operate appliance on forced low. Adjust setting to the correct pressure using “v” and “n” buttons on the control panel. Press SW4 again to lock in selected setting. Press SW3 to operate appliance on forced high. Adjust the setting to the correct pressure using “v” and “n” buttons on the control button. Press SEW3 again to lock in the selected setting Press SW5 once to return heater to normal operation. Press ON/OFF button to turn the unit OFF Thank you
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.