1. Manuals
  2. Consumer Electronics Support
  3. Sharp Support
  4. Clock Support
Support User Manuals
Question About Sharp Clock spc775
how do I change the time zone on this model? th...

how do I change the time zone on this model? thanks

Asked by Sherry on 12/10/2011 13  Answers

ManualsOnline posted an answer 12 years, 4 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Linda posted an answer 12 years, 4 months ago

6 Press the Celcius/Fahrenheit button and then the up arrow on the right side. I figured this out through trial and error. Hope it helps someone else.
Was this answer helpful?

Steve posted an answer 12 years, 3 months ago

6 Thanks! That worked! More specifically, press the C/F button and release, then the up button on the right side.
Was this answer helpful?

gilbert posted an answer 12 years ago

5 press the c\f relase then up clock button and works then press and hold c\f button to exit
Was this answer helpful?

John posted an answer 11 years, 4 months ago

4 This worked. Thank you
Was this answer helpful?

Thomas posted an answer 9 years, 5 months ago

4 o Pre and hold he SET button for a few seconds until the hour indicator blinks. o Use the arrow key to select the correct hour. Press set. o The minutes will blink next use arrow keys to set them and press set. o Year, month, and day will each blink to be set in same manor as described above. o Daylight sacings time will say ON or OFF and will blink until you choose, with the arrow key and press set. o Now, the tricky part. immediately after DST is set the timezone is waiting to be set. it is a tiny map of the US in the lower right corner of the display. It will have one quarter section darkened. Use the arrow keys to darken the section of the map representing your timezone and press the Set key. NOTE: If the radio tower icon comes on it will disable your ability to set anything for a while (about 10 minutes) if you're not done either wait 10 minutes or remove a battery to start the setting operation over again.
Was this answer helpful?

JZ posted an answer 10 years, 8 months ago

4 Actually just press the UP/DOWN button when in normal time mode and not in SET mode
Was this answer helpful?

stu posted an answer 10 years, 3 months ago

0 Thanks guys. It worked for me as well.
Was this answer helpful?

Renea Fowler posted an answer 10 years ago

0 Thank goodness.... it worked
Was this answer helpful?

Steve posted an answer 8 years, 4 months ago

0 Here is some more detail: (This is for Sharp Weather Station Model SPC775, but applies generally to a lot of other models)

Press the Celcius/Fahrenheit button (on the front, lower left corner) and then (after releasing the Celsius/Fahrenheit button) quickly press the up arrow on the up-down toggle on the front right side (the middle, long button).

The tiny icon for the Time Zone display will shift, time zone by time zone, across the country until your time zone is highlighted (shown in black).

FINALLY, press the Celsius/Fahrenheit button one more time — to lock in the time zone and ALSO to put your Celsius/Fahrenheit choice back in the correct mode.

The time-zone display is tiny, just to the right of the “minutes” number in the time display and centered even with the middle of that number — (and it’s just below the occasional “flashing” icon that shows that the electronic time-correction is looking for a signal).
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual