1. Manuals
  2. Consumer Electronics Support
  3. Sunbeam Support
  4. Mixer Support
Support User Manuals
Question About Sunbeam Mixer None
I can't release the tilt on my mixer. How can I ge...

I can't release the tilt on my mixer. How can I get it to release?

Asked by Jamie on 01/11/2014 1  Answer

ManualsOnline posted an answer 10 years, 4 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Rewarder User posted an answer 10 years, 1 month ago

5 Hi Most of them have a button to push that releases the mixer head to tip back. Sometimes the buttons stick and will not release. That picture looks like you are using the Heritage model. You have to remove two parts in order to get access to the piece that was causing the problem: 1) The "torpedo" shaped knob that sticks out from the mixer speed dial; 2) The speed dial itself Both of these pieces clip-in, and can be removed with a screwdriver by pressing in on one of the hooks that hold them in place. After these two pieces are removed look for a small washer right below the motor (it is sitting on top of the upper portion of a screw) -- in my case this washer had come loose; tighten it with a 1/4 size wrench (you can also tighten it by hand to release the tilt, it will probably become loose in the future if you don't tighten it further, but if you don't have the necessary tools this will at least allow you to get your tilt unlocked). On another note, after tightening this washer you may also notice that the tilt release had become easier to use -- previously you may have found that you have to press the tilt release button very hard to get the tilt to unlock. Please do accept the solution and revert for further assistance.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual