Send documentation comments to mdsfeedback-doc@cisco.com.
Contents
vi
Cisco MDS 9216 Switch Hardware Installation Guide
78-16165-01
Supervisor Module 1-6
Processor 1-7
Supervisor Module LEDs 1-7
Interface Module 1-8
Interface Module LEDs 1-9
Switching Modules 1-10
16-Port 1 Gbps / 2 Gbps Fibre Channel Switching Module 1-10
32-Port 1 Gbps / 2 Gbps Fibre Channel Switching Module 1-11
Switching Module Features 1-12
Switching Module LEDs 1-13
Fibre Channel Port Modes 1-14
IP Storage Services Module 1-15
Ports Configured to Run FCIP 1-16
Ports Configured to Run iSCSI 1-16
LEDs on IP Storage Services Module 1-17
32 Port Fibre Channel Advanced Services Module 1-18
Supported SFP Transceivers 1-21
Fibre Channel SFP Transceivers 1-21
Combination Fibre Channel/Gigabit Ethernet SFP Transceivers 1-22
CWDM Combination Fibre Channel / Gigabit Ethernet SFP Transceivers 1-22
Ethernet Ports 1-23
CHAPTER
2 Installing the Cisco MDS 9216 Switch 2-1
Pre-Installation 2-2
Installation Guidelines 2-2
Required Equipment 2-6
Unpacking and Inspecting the Switch 2-6
Installing the Chassis in the Rack 2-7
Grounding the Chassis 2-15
