Sawgrass Technologies, Inc. SubliJet IQ
®
Getting Started Guide for the EPSON Stylus D88
14
9. Position the tubing so that the
black line on it lines up with the
edge of the tube holder.
Note: This will leave enough slack
so that the cartridge bay can easily
slide from one side of the printer to
the other without creating tension
on the tubes.
10. Obtain the short tube holder
and remove the tabs from the
back exposing the adhesive.
Attach it to the left hand side of
the printer where the tubes hang
down to meet the Quick Connect
II™ ink box. Slide tubes into the
holder for placement.
11. Unclamp the end of each tube so that you are ready for printing.
10. Press the ink button to move the print head back to the ink cartridge
parked position.
Congratulations! You’ve
successfully installed a D88
Quick Connect II ink system
and printer.
