A SERVICE OF

logo

2.
Plug the power cable into the AC inlet on the printer’s rear
panel.
Note: If you move to another country, you may need to change
the voltage of the printer. See your dealer for information.
Testing the Printer
Now that your printer is fully assembled, you can use your
printer’s built-in test function to be sure the printer is working
correctly before you connect it to a computer.
Before performing the test, you need to plug in your printer and
load paper.
Plugging in the printer
Follow these steps to plug in the printer:
1.
Make sure the printer is turned off. (The zero (0) on the power
switch should be visible.)
2. Plug the power cable into a properly grounded electrical outlet.
Setting Up the Printer 1-15