266 iSeries and AS/400e System Builder
#2805 #2805 PCI Quad Modem IOA
The #2805 is a 4-line WAN adapter with four WAN ports with internal modems. Telephone cable (RJ-11) is used to connect
to the ports. This is the non-CIM version of the IOA.
Supported protocols are:
V.92 56 K Async PPP
Fax applications at data rates up to 33.6 K
The V.92 functions offer increased upload throughput, improved V.44 data compression, and shortened modem
synchronization periods.
The #2805 can be attached directly to a Linux partition. When ordered as #0616 - Direct Attach - #2805 PCI Quad Modem
IOA, an IOP is not required. When attached directly to a Linux partition, the #2805 cannot be accessed by OS/400
partitions.
Corequisite: Country- or region-specific telephone cables must be ordered. A minimum of one modem cable and a
maximum of four must be selected for each #2805. All modem cables on a system must be the same feature number. The
supported modem cables are:
#1010 Modem Cable-Austria
#1011 Modem Cable-Belgium
#1012 Modem Cable-Africa
#1013 Modem Cable-Israel
#1014 Modem Cable-Italy
#1015 Modem Cable-France
#1016 Modem Cable-Germany
#1017 Modem Cable-United Kingdom
#1018 Modem Cable-Iceland/ Sweden
#1021 Modem Cable-Fin/ Nor
#1022 Modem Cable-Netherlands
#1023 Modem Cable-Swiss
#1024 Modem Cable-Denmark
#1025 Modem Cable-U.S./Canada
The feature is country- or region-specific. Contact your IBM representative or Business Partner for details on availability.
The call waiting and modem on hold functions associated with V.92 are not supported.
Remote Power On through ring-indicator, SDLC, and synchronous PPP are not supported.
PCI card slots required: One.
Minimum operating system level: OS/400 V5R1 with PTFs identified in Information APAR II30079 at:
http://www-912.ibm.com/supporthome.nsf/document/10000035
The #2805 is a Customer Install Feature.
#2806 #2806 PCI Quad Modem (CIM)
The #2806 is a 4-line WAN adapter with four WAN ports with internal modems. Telephone cable (RJ-11) is used to connect
to the ports. This is the CIM version of the IOA.
Supported protocols are:
V. 92 56K Async PPP
Fax applications at data rates up to 33.6K
The V.92 functions offer increased upload throughput, improved V.44 data compression, and shortened modem
synchronization periods.
The #2806 can be attached directly to a Linux partition. When ordered as #0617 - Direct Attach - #2806 PCI Quad Modem
(CIM), an IOP is not required. When attached directly to a Linux partition, the #2806 cannot be accessed by OS/400
partitions.
Corequisite: Country- or region-specific telephone cables must be ordered. A minimum of one modem cable and a
maximum of two must be selected for each #2806. All modem cables on a system must be the same feature number. The
supported modem cables are:
#1019 Modem Cable- Australia
#1020 Modem Cable- China (Hong Kong S.A.R.)/New Zealand
The #2806 is country- or region-specific. Contact your IBM representative or Business Partner for details on availability.
