A SERVICE OF

logo

2. Remove any adapters that are blocking access to the air duct and processor
card connectors (see “Removing Adapters” on page 4-80).
3. Remove the screw that holds the air duct to the system board.
4. Spread the arms on the air duct and remove it from the system unit.
5. Touch the static-protective package containing the processor card to any
unpainted metal surface on the system unit; then remove the card from the
package.
6. Inspect the empty processor card connector and remove any dust that may have
collected.
Note: Do not push on the heatsink while installing or removing a processor
card. This could damage the processor.
4-64
7043 43P Series User's Guide