A SERVICE OF

logo

67
7532 Commissioning
Basic Setup step 2/5:
Enter the application parameters:
–tank shape (for a description, see page 49)
–medium property (for a description, see page 50)
–process cond. (for a description, see page 51)
Basic Setup step 3/5:
If "stilling well" or "bypass" is selected in the "tank shape" function, the following display
appears on the screen:
empty calibr. (for a description, see page 52)
full calibr. (for a description, see page 52)
Diameter of bypass / stilling well (for a description, see page 53)