13
Installing
Installing the Charging Station
2
1
●
Connect the power adaptor.
●
Set the RYDIS H65 detection distance
[16ft (5m) or 26ft (8m)].
●
Place the power adaptor inside of the
charging station.
●
Check the power connection and make sure blue lamp is on.
3
●
Make sure the location of the charging station is an
open area as illustrated.
-
Clear all obstacles in the area within
5ft (1.5m) in front, left, and right of the charging station
.
▶
If you install the RYDIS H65 in a place where it will be exposed to direct sunlight, the heat of the
sun may interfere with the auto charging, and the RYDIS H65 may become discolored over time.
▶
If your RYDIS H65 can’t return to the charging station, reset the detection distance as recommended below.
-
In a narrow area, set it to16ft (5m), and in a wide area, set it to 26ft (8m).
-
If you set the detection distance to 26ft (8m) in a narrow area, the Auto Charging may be interfered with.
5ft
(1.5m)
5ft
(1.5m)
5ft
(1.5m)
