7-33
SYSTEM SETTINGS
Contents
Copy Function Settings
* When a saddle stitch finisher is installed.
Item Factory default setting Page
■ Copy Function Settings
7-65
● Initial Status Settings
7-65
X Color Mode Full Color
X Paper Tray Varies depending on the machine
configuration
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output –
● Other Settings 7-66
X Copy Exposure Adjustment
7-66Color 5
Black & White 5
X Rotation Copy Setting Enabled 7-66
X Add or Change Extra Preset Ratios – 7-66
X Setting a Maximum Number of Copies 999 7-66
X Initial Margin Shift Setting
7-66Side 1 1/2"
Side 2 1/2"
X Erase Width Adjustment
7-66Edge Clearance Width 1/2"
Center Clearance Width 1/2"
X Card Shot Settings
7-66Original Size X: 3-3/8", Y: 2-1/8"
Fit to Page Disabled
X Automatic Saddle Stitch* Enabled 7-66
X Initial Tab Copy Setting 1/2" 7-66
X Disabling Deletion of Job Programs Disabled 7-67
X Disabling of Bypass-Tray in Duplex Copy Disabled 7-67
X Disabling of Auto Paper Selection Disabled 7-67
X Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-67
X B/W 600dpi x 600dpi Scanning Mode for Document Feeder Disabled 7-67
X B/W Quick Scan from Document Glass Enabled 7-67
● Color Adjustments 7-68
X Initial Color Balance Setting Factory default state 7-68
X Auto Color Calibration – 7-68
