Powersupply
If the POWER indicatordoesnot illuminate,checkthe following:
I Check
1 PossiblerernedY
I
Isthepowercableproperly
Turnofftheprinter,makecertainthatthepowercable
pluggedintotheelectrical
issecurelycomected,andthentumtheprinterbackon.
outlet?.
Ispowerbeingsuppliedto
Turnofftheprinter,unplugit.Try with another
appti-
theoutlet? anceoftheoutlettodeterrnin
eifelectricityisbeingsup
pliedtothatoutlet.
Istheprintervoltagecorrect? Checkthebottompanelofyourprintertoverifythatthe
outletvoltagecorrespondstothevoltagerequiredbythe
printer.Iftheydonotmatch,DONOTv tooperatethe
I printer.Contactyoursupplier.
Printing
If yourpfinterdoesnotprint,or suddenlystopsprinting,checkthefollow-
ing:
Check Possibleremedv
.
Istheinterfacecablecon-
Checkbothendsofthecable-printerandcomputerto
nectedsecurely?
makesurethattheconnectorisfirmlyinposition.
IstheON LINE indicatorillu-
IfitisnoLpressthe<
ON
LINE >buttontosettheprinter
minated?
on-line.
Is the POWER indicator
Ifitis,thepaperhasrunout.Loadmorepaper.
flashing?
Istheprinterbeepinginter-
Thereleaseleverhasmovedwhilethepaperisinprint-
mittently?
ingposition.Move thereleaselevertotheoriginal
position.
Isthepapercaughtup inter-
Turnoff thepower, remove thejamrnedpa~r, replace,
nally?
tumontheprinter, andcontinueprinting. Make sure that
the leading edge of the paper is smooth and uncreased.
Is the ribbon caught up Turn off thepower, remove the ribbon, retension it, and
around the print head? replace it. This problem occurs most frequently with a
worn ribbon+so you may need to replace the ribbon.
Is the software you are using Check the installation settings in your software, andre-
properly installed for your install if necessary.
printer?
Can the printer perform self-
Turn theprinter off, and turn it on again, holding down
test operations?
one of the buttons to perform a self-test. If these do not
work, contact your dealer.
2
108
