IBM Mode
The following commands take effect with the IBM mode.
CONTROL CODE
FUNCTION
<BEb
Bell
<BS> Backspace
<HT>
Horizontal tab
cLF> Line feed
<VT>
Vertical tab
cFF>
Fonn feed
<CR>
Carriage return
<so> Expanded printing for one line
<Sb
Condensed printing
<DCl>
Set printer on-line
<DC2>
<DC4>
pica pitch
Cancel one-line expanded pruning
<CAN> Cancel last line
&SD <so>
Expanded printing for one line
<Esc> <Sb Condensed printing
cESQ <EM> <o>
Manual feed
<ESD <EM> <4> Auto feed
&SC> <EM> “R”
Eject paper from ASF
<Esc> <EM> “T’ n Set print statt position on ASF
<Esc> ‘I-” co> Stop underlining
<E-SD “-I’ Cl> Start underlining
<Esc> I’-” “0
Stop underlining
<EsD “-” ” 1”
Start underlining
<Esc> “0”
Set line spacing to l/8 inch
cEsc> “1”
Set line spacing to 7f72 inch
&SD “2” Execute cBSC> “A”
<Esc> “3” n Set line spacing to nf216 inch
<Esc> “4”
<Es0 “5” -6
Set top of page at current position
Cancel automatic line feed
<FsQ “5” <l>
Set automatic line feed
<Es3 “6” Select character set #2
<Esc> ‘T Select character set #1
<ESC> “8”
Disable paper-out detector
<Esc> ‘9”
-&SC> ‘I:”
Enable paper-out detector
Elite itch
~ESC>“=“nlnZ~DC4saOala2mlm2...ml P
Define draft download characters
&SC> “=‘I nl a2 eNA& a0 al d ml m2 m46
Define NLQ download characters
&.!x> “@” Reset printer
<Es0 “A” n
Set line spacing to nf72 inch
<Esc> “B” nl n2 . . . <o> Set vettical tab stops
<Es0 “c’ n Set page length to R lines
<Es3 “c’ <o, n Set page length to n inches
&SC> “D” nl d . . . <o> Set horizontal tab stops
<Es5 “E”
Emphasized printing
&SC> “F
cJzsc> “G”
Cancel emphasized printing
Double-stnke printing
cEsc> “H” Cancel double-strike printing
<Esc> “r’ <o> Select draft quality characters
<EsD “r’ <l> Select draft elite characters
<Esc> “I- c2>
Select NLQ characters
<EsD “r’ <3> Select NLQ characters
cEsc> “I- <4> Select draft download character set
<Esc> “IT’ 6> Select draft elite download character set
<Esc> “I- <7> Se&t NLQ download character set
139
