Appendix A OpenBoot Configuration Variables 33
diag-switch? true, false false If true:
• OpenBoot verbosity is set to maximum.
• After a boot request, boot diag-file
from diag-device.
If false:
• OpenBoot verbosity is set to minimum.
• After a boot request, boot boot-file
from boot-device.
error-reset-recovery boot, sync,
none
boot Command to execute following a system
reset generated by an error.
network-boot-
arguments
[protocol,]
[key=value, ]
none Arguments to be used by the PROM for
network booting. Defaults to an empty
string. Use network-boot-arguments to
specify the boot protocol (RARP/DHCP)
and a range of system knowledge to be
used in the process. For further
information, see the eeprom (1M) man
page or your Solaris reference manual.
TABLE A-1 OpenBoot Configuration Variables Stored on the System Processor (Continued)
Variable Possible Values Default Value Description
