4-1
Chapter 4
Blade Module Features
Figure 4-1. SBA-7222G-T2 Blade Unit Front View
This chapter describes the SBA-7222G-T2 blade unit. Installation and maintenance
should be performed by experienced technicians only.
See Figure 4-1 for a front view of the blade unit and Table 4-1 for its features.
Table 4-1. SBA-7222G-T2 Blade Unit Features
Feature Description
Processors
Each node supports two 1944-pin G34 sockets for up to two AMD Opteron
6100 series processors per node.
Memory
Supports up to 128 GB of ECC Registered DDR3-1333/1066/800 SDRAM
DIMMs or 32 GB of ECC Unbuffered DDR3-1333/1066/800 SDRAM
DIMMs in eight DIMM slots per node
Storage One or two 2.5" hot-plug SATA or SSD hard disk drives per node
Ports KVM port (1 per node)
Features
Onboard Matrox G200eW Graphics chip with 16 MB of SDRAM, IPMI 2.0,
Plug and Play, APM 1.2, DMI 2.3, PCI 2.2, ACPI 1.0/2.0, SMBIOS 2.3,
Real Time Clock
Power Consumption
Base Power Draw (~35W) / Power per CPU (85W/115W/137W/140W) /
Power per DIMM (typically ~7W)
