Date Mode:
Specify the DST configuration in Date mode. This configuration is
one-off in use.
Time
Offset: Specify the time adding in minutes when Daylight
Saving Time comes.
Start/End Time: Select the start time and end time
Saving Time. The start time is standard time, and the end
Daylight Saving Time.
Note:
● When the DST is disabled, the predefined mode, recurring mode and date mode cannot be
configured.
● When the DST is enabled, the default daylight saving time is of European in predefined mode.
3.7.7 Logs
The Log system of router can record, classify and manage the system information effectively.
Choose the menu Maintenance→Logs→Logs to load the following page.
Figure 3-91 Logs
List of Logs
List of Logs displays the system log information in log buffer.
Config
Enable Auto-refresh:
With this option selected, the page will refr
esh automatically every 5
seconds.
Severity:
Displays the severity level of the log information. You can select a
severity level to display the log information with the same level.
Send System Logs: Select Send System Logs and specify the server IP, then
added logs will be sent to the specified server.
The Logs of switch are classified into the following eight levels.
-122-
