Runtime switching software default settings 43
Table 12 Switch A and Switch B: general default settings
Setting Value
UFD Link to Disable – Ports None
UFD Link To Disable -- Trunks None
RMON History Group Number None
RMON History Interface MIB to Monitor None
RMON History Number of Requested
Buckets
30
RMON History Polling Interval 1800
RMON History Owner None
RMON Event Group Number None
RMON Event Description None
RMON Event Type None
RMON Alarm Group Number None
RMON Alarm MIB to Monitor None
RMON Alarm Interval 1800
RMON Alarm Sample Type abs
RMON Alarm Type either
RMON Alarm Rising Threshold 0
RMON Alarm Falling Threshold 0
RMON Alarm Rising Event Index 0
RMON Alarm Falling Event Index 0
RMON Alarm Owner Null
IP Forwarding Disabled
RIP Disabled
Configurable User Name – admpw admin
Configurable User Name – opw Disabled
Configurable User Name – usrpw user
Configurable User Name – UID 1-10 Disabled
Uplink Fast Disabled
LACP Disabled
THASH – enable SIP and DIP
SNMPv1 – Read community string: public
SNMPv1 – Write community string: private
SNMPv1 – SNMP state machine timeout: 5
SNMPv1 – authentication traps: disabled
SNMPv1 – Uplink Failure Detection
traps:
disabled
SNMPv1 – link up/down traps: enabled
SNMPv1 – v1/v2 access: enabled
802.1x – 8021x disabled
802.1x – mode force-auth
802.1x – qtperiod 60
802.1x – txperiod 30
