Runtime switching software default settings 45
Switch A and Switch B: port names, VLANs, STP, trunking default
settings
IMPORTANT: If you have the ProLiant BL p-Class F-GbE2 Interconnect Kit option with the QuadSX Interconnect
Modules, the management interface supports only 1000M/Full and Auto options for the Speed/Duplex fields
for Gigabit uplink ports. The fiber QuadSX Interconnect Module supports only 1000-Mb/s (Gigabit) speed, and
not 10-Mb/s or 100-Mb/s.
Switch A and Switch B are configured with the following factory default settings for port names, VLANs, STP, and
trunking.
Table 13 Switch A and Switch B: port names, VLANs, STP, and trunking default settings
Port type Port
no.
Speed PVID Tag
(Y/N)
VLAN name Port name STP Trunk group
Server 1 10/100/1000 (Auto) 1 N Default
VLAN
Downlink1 Disabled
Server 2 10/100/1000 (Auto) 1 N Default
VLAN
Downlink2 Disabled
Server 3 10/100/1000 (Auto) 1 N Default
VLAN
Downlink3 Disabled
Server 4 10/100/1000 (Auto) 1 N Default
VLAN
Downlink4 Disabled
Server 5 10/100/1000 (Auto) 1 N Default
VLAN
Downlink5 Disabled
Server 6 10/100/1000 (Auto) 1 N Default
VLAN
Downlink6 Disabled
Server 7 10/100/1000 (Auto) 1 N Default
VLAN
Downlink7 Disabled
Server 8 10/100/1000 (Auto) 1 N Default
VLAN
Downlink8 Disabled
Server 9 10/100/1000 (Auto) 1 N Default
VLAN
Downlink9 Disabled
Server 10 10/100/1000 (Auto) 1 N Default
VLAN
Downlink10 Disabled
Server 11 10/100/1000 (Auto) 1 N Default
VLAN
Downlink11 Disabled
Server 12 10/100/1000 (Auto) 1 N Default
VLAN
Downlink12 Disabled
Server 13 10/100/1000 (Auto) 1 N Default
VLAN
Downlink13 Disabled
Server 14 10/100/1000 (Auto) 1 N Default
VLAN
Downlink14 Disabled
Server 15 10/100/1000 (Auto) 1 N Default
VLAN
Downlink15 Disabled
Server 16 10/100/1000 (Auto) 1 N Default
VLAN
Downlink16 Disabled
X-Connect 17 10/100/1000 (Auto) 1 N Default
VLAN
XConnect1 Enabled 1
X-Connect 18 10/100/1000 (Auto) 1 N Default
VLAN
XConnect2 Enabled 1
Uplink 19 10/100/1000 (Auto) 1 N Default
VLAN
Uplink1 Enabled
