2-18
SUPER X5DL8-GG/X5DLR-8G2+/X5DLR-8G2 User’s Manual
GLAN1 Enable/Disable
(X5DL8-GG)
Change the setting of jumper JP54
to enable or disable the onboard
LAN1 port on the motherboard.
See the table on the right for
jumper settings. The default set-
ting is pins 1-2.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
LAN1
Enable/Disable
Jumper Settings
(JP54)
GLAN2 Enable/Disable
(X5DL8-GG)
Change the setting of jumper JP4
to enable or disable the onboard
LAN2 port on the motherboard.
See the table on the right for
jumper settings. The default set-
ting is pins 1-2.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
LAN2
Enable/Disable
Jumper Settings
(JP4)
SCSI Enable/Disable
The SCSI Enable/Disable jumper at
JA4 allows you to enable or dis-
able the onboard SCSI. The nor-
mal (default) position is on pins 1-
2 to enable SCSI. See the table on
the right for jumper settings.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
SCSI Enable/Disable
Jumper Settings
(JA4)
SCSI Termination Enable/
Disable
Jumpers JPA1 and JPA2 allow you
to enable or disable termination for
the SCSI connectors. Jumper JPA1
controls SCSI channel A and JPA2
is for SCSI channel B. The default
setting is open to enable (teminate)
both SCSI channels. See the table
on the right for jumper settings.
Jumper
Position
Open
Closed
Definition
Enabled
Disabled
SCSI Channel Termination
Enable/Disable
Jumper Settings
(JPA1, JPA2)
