Chapter 1: Overview
1-5
X9DRG-HF/X9DRG-HTF Jumpers
Jumper
Description Default Setting
JBT1 Clear CMOS See Chapter 2
JPB1 BMC Enabled Pins 1-2 (Enabled)
JPG1 VGA Enabled Pins 1-2 (Enabled)
JPL1 GLAN1/GLAN2 Enable Pins 1-2 (Enabled)
JPME1 Management Engine (ME) Recovery
Mode Enable
Pins 1-2 (Normal)
JPME2 Management Engine (ME)
Manufacture Mode
Pins 1-2 (Normal)
JWD Watch Dog Timer Enable Pins 1-2 (Reset)
X9DRG-HF/X9DRG-HTF Connectors
Connectors Description
Battery Onboard CMOS Battery (See Chpt. 3 for Used Battery Disposal)
FAN1~4 CPU Fans
FANA~H GPU Fans
JCOM1 Front Accessible COM1 Header
JF1 Front Panel Control Header
JL1 Chassis Intrusion
JOH1 Overheat LED Indicator
JI
2
C1/JI
2
C2 Power Supply SMBbus I
2
C Header
JPW1 SMC-Proprietary 62-pin PWR Connector (Warning-Next Page)
JPW2 SMC-Proprietary 20-pin PWR Connector (Warning-Next Page)
JPW3, JPW4 12V 8-pin PWR Connectors (Warning-Next Page)
JPW5~8, JPW11 12V 8-pin SATA PWR Connectors (Warning-Next Page)
JPW9 SMC-Proprietary 38-pin PWR Connector (Warning-Next Page)
JPW10 12V 4-pin SATA PWR Connectors (Warning-Next Page)
JSD1 Power Fail Header
JTPM1 TPM (Trusted Platform Module)/Port 80
JVGA1 Backpanel VGA Port
LAN1/LAN2 X540_based 10G Ethernet LAN Ports 1/2 (X9DRG-HTF);
I350)_based 1G LAN Ports 1/2 (X9DRG-HF)
(IPMI) LAN IPMI_Dedicated LAN
(I-)SATA 0~5 SATA 3.0 Connectors (I-SATA 0/1), SATA 2.0 Connectors (I-
SATA 2~5)
(S-)SATA 0~3 SATA 2.0 Connectors (S-SATA 0~3)
