56 • Configuring Fax lines GFI FAXmaker for Exchange/SMTP Manual
fax device you are using and these are described at the end of this
chapter.
Setting up fax lines for an ISDN card
Screenshot 60 - Adding an ISDN channel
1. After you clicked the ‘Add’ button in the Lines/Devices dialog, the
‘Add fax line’ dialog will appear, which requires you to specify the fax
line, device type and the physical fax port on which this fax line is
connected. Select the first available fax line number.
2. Now select your device type. If you have a 2, 4 or 8 channel ISDN
card, select ‘ISDN BRI CAPI 2.0 devices’. If you have a 30 channel
card select ‘ISDN PRI CAPI 2.0 devices’.
3. In the Physical fax port box, select the channel/port of the device
that you want to use for this fax line. For example, if you are using an
ISDN BRI card, you can select two channels for each card. If you want
to use channel 1, select ISDN1B1. If you want to use channel 2, select
ISDN1B2. (If you are using more than one ISDN card, you can select
ISDN2B1 and ISDN2B2 for the second card, and so on.) If you wish to
copy the settings for a line you have already configured, tick ‘Copy
settings from’ and select the line from the drop down list. Click OK.
