A SERVICE OF

logo

Chapter 3: RAID Confi guration
3-5
6. Once you've selected all the disk drives for new arrays, and all the drives
selected have appeared in the "Selected Drives" dialogue box, press <Enter>.
Then, a dialogue box showing array properties will display.
4. Use the arrow keys to highlight the channel(-the disk drive) you wish to create
a new array, and press <Insert>.
(*Note: To de-select any disk, highlight the disk and press <Del>.)
5. The disk drive that you've selected to create a new array will appear in the
"Selected Drives" dialogue box as shown below: