A SERVICE OF

logo

Chapter 3: RAID Confi guration
3-25
3.3 Using Disk Utilities
The Disk Utilities enable you to format or to verify the integrity of your Hard
Drive Disks and to determine if there is any defect. (*Note: Formatting a disk
will overwrite data stored in the disk. Please backup your data before format-
ting a disk.)
3.3.1 To Use Disk Utilities (*for SCSI only)
(*Note: Please refer to Page 3-1 for SCSI Jumper confi guration before using
"Disk Utilities". Please refer to Section 3.3.2 for SAS and SATA Disk Utilities.)
1. Power on your computer. When prompted, press the <Ctrl> and <A> keys
simultaneously to enter the RAID Confi guration Utility. From the RAID Confi gu-
ration Main Menu, select "Disk Utilities" as shown below:
2. Select "Disk Utilities" and press <Enter>. The Disk Utilities Sub-Menu ap-
pears. From the submenu select the Channel (-the disk drive) you wish to
format or to scan.