A SERVICE OF

logo

Open as PDF
next previous
TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater
- 35 -
Figure 4-5 Add A New Device
Method Three: Enter the PIN from my AP
Step 1: Get the Current PIN code of the AP in Figure 4-3 (each AP has it
s unique PIN code. Here
takes the PIN code 12345670 of this AP for example).
Step 2: For the configuration of the wireless adapter, please choose “Enter the PIN of my
access point or wireless router” in the configuration utility of the WPS as below, and
enter the PIN code of the AP into the field after “Access Point PIN”. Then click Connect.
The WPS Configuration Screen of Wireless Adapter
)
Note:
The default PIN code of the AP can be found in its label or the WPS configuration screen as
Figure 4-3.
Y
ou will see the following screen when the new device has successfully connected to the network.